Question

Dechlorination contact tank (Wastewater Treatment) An activated sludge plant has a design flow (average daily flow)...

Dechlorination contact tank (Wastewater Treatment)

An activated sludge plant has a design flow (average daily flow) of 11 MGD. Determine dimensions of dechlorination tank. The design parameters: use 1 tank. detention time = 30 sec, depth = 10 ft, rectangular tank: L = 4 W. use maximum hourly flow (3 * Average design flow)

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A wastewater treatment plant receives an average of 3.0 MGD of wastewater flow. Two rectangular primary...
A wastewater treatment plant receives an average of 3.0 MGD of wastewater flow. Two rectangular primary clarifiers operating in parallel will treat the flow. If the length of each clarifier is four times its width, the width is 20 ft, and the depth is 10 ft, determine: a) the overflow rate in gpd/ft2. b) the detention time of each clarifier (in days).
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a...
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a community of 45,000 people has a flow of 100 gal/person/day and a BOD5 loading of 0.2 lb/person/day. The upstream characteristics of the receiving waters are: stream flow rate = 20 cfs and BOD5 = 2 mg/L The water quality standards require the in-stream BOD5 to be less than 7 mg/L in this stretch of the river. The minimum BOD removal efficiency that the treatment...
Wastewater treatment The Ampang Jaya Municipal Council with a population of 350,000 and several industries discharged...
Wastewater treatment The Ampang Jaya Municipal Council with a population of 350,000 and several industries discharged 11 MGD of raw sewage into an activated sludge system treatment plant. The average concentration of BOD5 is 240 mg/L and the suspended solids is 260 mg/L. If the average domestic per capita sewage flow is 225 L/c.day, what is the average flow of the industrial wastewater (in MGD)? marks) If the average BOD5 load from the domestic sewage is 55gcapita-1day-1, determine the average...
Two identical sedimentation tanks are to be designed for an activated sludge plant with a flow...
Two identical sedimentation tanks are to be designed for an activated sludge plant with a flow of 2 MGD (flow is split evenly between the two clarifiers). The MLSS will be 1950 mg/L. The underflow (return sludge) concentration will be 12,000 mg/L. A settling curve was developed (using a column with Ho = 2.13 ft) and is shown below. For clarification area use a safety factor of 2.0 and for thickening area use a safety factor of 1.5. Tanks are...
A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process...
A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process followed by an activated sludge process composed of aeration tanks and a secondary clarifiers. This problem focuses on the activated sludge process. The activated sludge process receives a flow of 15 million gallons per day (MGD). The primary sedimentation process effluent has a BOD5 concentration of 180 mgBOD5/L (this concentration is often referred as S). Before flowing into the activated sludge process, the primary...
As an environmental engineer, you have been selected to design a secondary wastewater treatment plant for...
As an environmental engineer, you have been selected to design a secondary wastewater treatment plant for your town of 15000 people which also has some industry that discharges wastewater to the plant. The average daily wastewater flow is 2.1 MGD. If the If the average domestic per capita sewage flow is 100 gpcd, what is the average flow of the industrial wastewater (in MGD)? *
. A wastewater treatment plant is to be designed for the 5-d sustained peak flowrate given...
. A wastewater treatment plant is to be designed for the 5-d sustained peak flowrate given an average daily flow of 13 MGD. Two aerated grit chambers in parallel will provide a total detention time of 4 minutes at peak flow. Determine: a) The volume of each chamber, in m3 . b) Chamber dimensions, in m, (length and width) if the design depth is 3.5 m and W:D is 1.2:1. Is the calculated L:W within the recommended range? c) Using...
Two identical sedimentation tanks are to be designed for an activated sludge plant with a flow...
Two identical sedimentation tanks are to be designed for an activated sludge plant with a flow of 2 MGD (flow is split evenly between the two clarifiers). The MLSS will be 1950 mg/L. The underflow (return sludge) concentration will be 12,000 mg/L. A settling curve was developed (using a column with Ho = 2.13 ft) and is shown below. For clarification area use a safety factor of 2.0 and for thickening area use a safety factor of 5. Tanks are...
Two identical sedimentation tanks are to be designed for an activated sludge plant with a flow...
Two identical sedimentation tanks are to be designed for an activated sludge plant with a flow of 2 MGD (flow is split evenly between the two clarifiers). The MLSS will be 1950 mg/L. The underflow (return sludge) concentration will be 12,000 mg/L. A settling curve was developed (using a column with Ho = 2.13 ft) and is shown below. For clarification area use a safety factor of 2.0 and for thickening area use a safety factor of 1.5. Tanks are...
A 14 mgd wastewater treatment plant has a primary clarifier that treats an influent with 800...
A 14 mgd wastewater treatment plant has a primary clarifier that treats an influent with 800 mg/L of solids and a removal efficiency of 55%. Sludge at the bottom of the tank is pumped at a rate of 0.1 mgd. a. What is the effluent solids concentration from the clarifier (in mg/L)? b. What is the solids concentration in the sludge at the bottom of the tank (in mg/Land %)? c. The primary sludge is further processed in a digester...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT