Question

Problem 1 (Hint: use the stress to calculate appropriate unit weights) Total vertical stress at a...

Problem 1 (Hint: use the stress to calculate appropriate unit weights)

Total vertical stress at a depth of 10’ below the ground surface is 1100 psf. The water table is at a depth of 20’.

What is the void ratio of the soil if the moisture content is 22% and the Gs = 2.67?

If the water table rises to the surface and saturates the soils (S=100%), what is the water content of the soil?

e =          

new water content (w) =                                        

Homework Answers

Answer #1

please like sir

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Calculate the total overburden stress, pore water pressure, and effective overburden stress at a depth of...
Calculate the total overburden stress, pore water pressure, and effective overburden stress at a depth of 12 feet for the given soil profile. A 2 ft sand layer with total unit weight of 107 pcf that is overlaying a 14 ft deep saturated clay layer with a total unit weight of 118 pcf, sitting on the bedrock. The groundwater table is 2 ft below the ground surface.
Q1. Complete the following table, provided for a sandy soil (Gs =2.65). Accordingly, find the dry...
Q1. Complete the following table, provided for a sandy soil (Gs =2.65). Accordingly, find the dry unit weigh of this soil. Mass (t) Vol. (m3) Air 13.46 Water 13.25 Solids 50.00 Total Q2. A soil specimen has a moisture content of 21%, a void ratio of 0.6, and a specific gravity of 2.7. Determine the bulk unit weight of this soil. Q3. If we are dealing with a very soft clay soil in the site, which field test equipment will...
You should use excel functions and capabilities to solve the problem. Inputs and outputs should be...
You should use excel functions and capabilities to solve the problem. Inputs and outputs should be clear using different colours. There is no mark for copying and pasting the solution. please provide step by step formulas to conpute in excel Q3 A rigid strip footing with a width of B is constructed above the ground on a clay deposit, overlying bedrock. The depth of clay layer is H and the water level is at the natural ground surface. Before construction...
Using the data in Textbook Problem 8.8: a. Plot the vertical effective consolidation stress versus void...
Using the data in Textbook Problem 8.8: a. Plot the vertical effective consolidation stress versus void ratio on both arithmetic and semi-log graphs. For the arithmetic graph, constrain the vertical axes to 0.55 and 0.95; and the horizontal to 0 to 1,500 kPa; for the semi-log graph, use the same vertical axis constraints, but use 10 kPa and 10,000 kPa to ease interpretation. Plot the data points only, and draw in a smooth curve by hand. Plot each graph on...