Question

Determine the depth (y), and the pressure (p) for a rectangular channel that has a discharge,...

Determine the depth (y), and the pressure (p) for a rectangular channel that has a discharge, Q=300 m3/s, (uniform flow)

(n= 0.014 Manning) Slope=0.65 b(wide)=2.00 m

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
1) Determine the critical depth, critical slope and Froude Number at section y=0.4 m in a...
1) Determine the critical depth, critical slope and Froude Number at section y=0.4 m in a 1 m wide rectangular channel carrying 1.5 m3 /s. n=0.014. 2) Design a circular channel to convey Q=4 m3 /sec, in order to have maximum velocity. n=0.014, S0=0.008.. 3) Design a circular channel to convey flow rate Q=3 m3/sec, in order to have the flow depth y=1.5, n =0.014, bed slope 0.0006.
A rectangular channel has a width of 9.8 m and a flow discharge of 48 m3/dt....
A rectangular channel has a width of 9.8 m and a flow discharge of 48 m3/dt. Slope of the channel bottom is 0.0018 and manning coefficient is 0.037. Calculate normal water depth and critical water depth
The flow in a very wide rectangular channel tends to a freefall at which the depth...
The flow in a very wide rectangular channel tends to a freefall at which the depth is reduced to 0.67 times the normal depth. The channel conveys a specific discharge of 4 m3/s/m and has a bed slope of 10 cm/km. Estimate the distance upstream of the fall where the water depth is 0.9 times the normal depth. Take the Manning coefficient as 0.025 and use the step-by-step (direct step) method.
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n...
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n is 0.003. Determine the normal depth when the slope is 0.008. Check whether the flow is sub or supercritical. If the normal depth is to be kept at 2 m, determine the slope.
The maximum Manning’s n for a smooth, clean, unlined, uniform earthen channel is about (based on...
The maximum Manning’s n for a smooth, clean, unlined, uniform earthen channel is about (based on MSMA): 0.012 0.025 0.033 0.002 The Manning’s n for a straight concrete-lined channel with off-form finished is about (average): 0.013 0.016 0.30 0.14 Water flows in a concrete-lined (n=0.013) rectangular channel of 3m wide at a flow depth of 1.2m and a slope of 0.00 Determine the discharge in the channel using Manning’s formula? 10.5 m3/s 11.6 m3/s 8.5 m3/s In a wide rectangular...
A rectangular channel with a width of 6.5m and water depth of 1.35m has a channel...
A rectangular channel with a width of 6.5m and water depth of 1.35m has a channel bed slope of 1 in 900. Determine the discharge when Manning’s roughness coefficient n=0.015. By changing the size of the channel but keeping the same quantity of lining, determine the new dimensions (water depth and width) if it is desired to increase the discharge to a maximum and also calculate percentage increase in discharge
A rectangular channel 6.20 m wide and 1.20 m deep is laid on a uniform slope...
A rectangular channel 6.20 m wide and 1.20 m deep is laid on a uniform slope of 0.003. The roughness coefficient of the channel is 0.013 m. a. Determine the discharge in the channel in m3/sec. b. Determine the savings in the lining per meter length of channel if the most efficient rectangular section is to be used for the same flow and properties. c. Determine the savings in earth excavation per meter length of channel if the most efficient...
A. Starting from the specific energy equation [E = y + v2 /(2g)], drive an expression...
A. Starting from the specific energy equation [E = y + v2 /(2g)], drive an expression for the critical flow depth (yc) in a rectangular channel as a function of the flow rate /unit width (q). Proof also that Froude number in that case =1.0 B. A trapezoidal channel with a bottom width of 4 m and side slopes 4H: 1V carries a discharge of 30 m3 /s. The channel has bed slope= 0.1 % and manning roughness coefficient =...
Water flows in a rectangular concrete channel that is 10 m wide and has a slope...
Water flows in a rectangular concrete channel that is 10 m wide and has a slope of 0.005. The depth of the uniform flow in the channel (y1) is 450 mm and the discharge per width of the water is 2.2 m2/s. The downstream channel is smooth, and a hydraulic jump is forced to form in the channel by installing a sill. Calculate: (i) the depth and velocity of the water downstream of the hydraulic jump; (ii) the difference in...
3. A trapezoidal channel has a base width b = 8 ft and side slopes 6H:1V....
3. A trapezoidal channel has a base width b = 8 ft and side slopes 6H:1V. The frictional slope is Sf = 0.035 and the Manning roughness coefficient is n = 0.014. Design a channel if channel discharge is = 15.45 m3 /s using Mannings equation. The farmer land is 3.482 acre with a length of 951.43 ft. what is the best length for the grass waterway? Depth of channel, d=? (5).   Top width of the channel=? (3) Freeboard of...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT