Question

A 100-ft steel tape standardized at 68°F and supported throughout under a tension of 12 lb...

A 100-ft steel tape standardized at 68°F and supported throughout under a tension of 12 lb was found to be exactly 100.010 ft long. The tape had a cross-sectional area of 0.0075 in2 and a weight of 2.25 lb. This tape is to be used to layout a distance AB of 529.81 ft under the following conditions: 95°F, supported throughout, tension of 20 lb. What length is required to layout the specified distance?

ANSWER IS NOT 529.72

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 100-ft steel tape standardized at 68°F and supported throughout under a tension of 12 lb...
A 100-ft steel tape standardized at 68°F and supported throughout under a tension of 12 lb was found to be exactly 100.010 ft long. The tape had a cross-sectional area of 0.0075 in2 and a weight of 2.25 lb. This tape is to be used to layout a distance AB of 529.81 ft under the following conditions: 95°F, supported throughout, tension of 20 lb. What length is required to layout the specified distance?
A 100 ft steel tape of cross-sectional area 0.0025 in2, weight 2.0 lb, and standardized at...
A 100 ft steel tape of cross-sectional area 0.0025 in2, weight 2.0 lb, and standardized at 68°F is 99.983 feet between end marks when supported throughout under a 10-lb pull. a. What is the true horizontal length of a recorded distance AB if AB was measured to be 140.23 ft? At the time of measurement, the average temperature was 55°F, the tape was unsupported and there was 17 lbs of tension on the tape. (Assume horizontal taping and all full...
You are measuring a line with a steel tape that has a standardized length equal to...
You are measuring a line with a steel tape that has a standardized length equal to 100.000 feet and a weight of 2.25 lb. Three full tape lengths and one partial length were used when making the measurement, resulting in a recorded length of 389.28 ft. The tape was supported at ends only and a pull of 12 pounds was used. What is the distance after being corrected for sag?
4. A 50-m tape of standard length has a weight of .05kg/m, with a cross-sectional area...
4. A 50-m tape of standard length has a weight of .05kg/m, with a cross-sectional area of 0.04 sq.cm. It has a modulus of elasticity of 2.10x106 kg/sq.cm. The tape is of standard length under a pull of 5.5 kg when supported throughout its length and a temperature of 20°C. This tape was used to measure a distance between A and B and was recorded to be 458.65m. long. At the time of measurement the pull applied was 8 kg....
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT