Question

A direct shear test was run a cylindrical sample of sands using a vertical force of...

A direct shear test was run a cylindrical sample of sands using a vertical force of 160N. The sample had a diameter of 51mm. Determine: a) If the maximum horizontal force was 1065N, what was the peak friction angle? b) If this material is tested using a triaxial apparatus, what will be the major principle stress σ1 ’ at failure, under the minor principle stress of σ3 ’ = 120 kPa?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A soil sample was taken from the field and tested in the lab in drained triaxial...
A soil sample was taken from the field and tested in the lab in drained triaxial conditions. If the soil failed at a major principle stress σ1 ’ = 130 kPa, and a minor principle stress σ3 ’ = 55 kPa: a) What is the effective stress friction angle of the soil? b) What was the shear stress at failure? c) What was the normal stress at failure? Please using the Mohr circle to illustrate your answer.
A soil element is subjected to a minor principle stress of 50 kPa on a plane...
A soil element is subjected to a minor principle stress of 50 kPa on a plane rotated 20 °counterclockwise from vertical. If the deviator stress is 120 kPa and the shear strength parameters are a friction angle of 30° and a cohesion of 5 kPa, determine the magnitude of the stresses on the failure plane and the orientation of this plane with respect to the major principle stress plane.
A cylindrical soil sample was subjected to axial principal stresses,  and radial principal stresses, . The soil...
A cylindrical soil sample was subjected to axial principal stresses,  and radial principal stresses, . The soil could not support additional stresses when = 300 kPa and =100 kPa. (a) Determine the soil's friction angle, . (b) Find the angle of the failure plane at failure within the soil sample, . (c) What is the normal stress on the failure plane at failure, ? (in kPa) (d) What is the shear stress on the failure plane at failure, ? (in kPa)...
QUESTION 4 (20 marks) Following information is reported on the basis of a direct shear test...
QUESTION 4 Following information is reported on the basis of a direct shear test conducted on dry sand; • Specimen dimension: 50mm x 50mm x 30 mm • Gs=2.7 • Normal stress: 100+30 kPa • Angle of friction: 330 a) Determine the shear force required to cause failure b) What was the mass of the sample if the initial void ratio of the sample is 0.68. c) A second test was conducted on the same sand at the same void...
(a) Two separate direct shear tests were conducted on soil samples with the shear box having...
(a) Two separate direct shear tests were conducted on soil samples with the shear box having dimensions of 80 mm × 80 mm on plan view. Assuming this cross-sectional area remains unchanged, determine the cohesion intercept (c’) and friction angle (φ’) of the soil based on the following results obtained at failure. Direct shear test results Test Normal force (N) Shear force (N) 1 210 257 2 360 372 (b) A CU triaxial test was conducted on a specimen of...