Question

7-30 Highway Materials Soils and Concretes A concrete mix contains the following quantities per cubic yard:...

7-30 Highway Materials Soils and Concretes
A concrete mix contains the following quantities per cubic yard:
cement 516lbs
water 273lbs
fine aggregate 1355lbs
coarse aggregate 1910lbs

Calculate the proportions in kg/m^3. find the density in lb/ft^3 and kg/m^3

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A concrete mix design requires each cubic yard of concrete to have 1800 lbs dry coarse...
A concrete mix design requires each cubic yard of concrete to have 1800 lbs dry coarse aggregate (density 4400lb/yd3), 615 lbs cement (density 5300lb/yd3), 320 lbs water (density 1680 lb/yd3), and 6% air. The available aggregates are: coarse aggregate with moisture content of 3.0%, absorption = 1.7%, fine aggregate with moisture content of 3.3%, absorption = 1.9%. Calculate a. Required weight of coarse aggregate b. Required weight of fine aggregate (density 4250 lb/yd3) c. Required weight of water
Use the given data below to calculate the cost for a 1 cubic-meter batch of concrete....
Use the given data below to calculate the cost for a 1 cubic-meter batch of concrete. Note: The data is the result from a concrete mix design. Data: Coarse Aggregate: 2012.85 lb/yd3 Fine Aggregate : 1170.15 lb/yd3 Cement : 612 lb/yd3   Coarse Aggregate Cost: $4,000 per cubic-yard Fine Aggregate Cost : $3,500 per yard cubic-yard Cement Cost : $1,300 per bag and 1 bag of cement = 42.5 kg
... 00 E H.W 1. Design concrete mix according to ACI with volumetric equation, and calculate...
... 00 E H.W 1. Design concrete mix according to ACI with volumetric equation, and calculate the quantities of concrete ingredients for a slab and 5 bored piles (Show your results in a Table). Average compressive strength required at 28 days = 35 N / mm 'with Slump is (75-100). Dry rodded mass of coarse aggregate is 1600kg / m3. Fineness modulus of fine aggregate is 2.9. the concrete will be exposed to mild waves of freezing and thawing. The...
) The following recipe was determined as part of a concrete mix design: Water-cement ratio:   0.48...
) The following recipe was determined as part of a concrete mix design: Water-cement ratio:   0.48 Coarse aggregate:        0.60 ft3 CA (bulk volume, dry-rodded) per ft3 concrete Water requirement:    9.6 lbs/ft3 (before moisture corrections) Air content:                5.0% by volume Assuming that the CA and FA to be used in the mix are both at SSD, the moisture content of the CA is 0.5%, the moisture content of the FA is 2.5%, the specific gravity of the CA and FA particles...
Concrete is required for an interior concrete column in a commercial building in Corvallis, Oregon. A...
Concrete is required for an interior concrete column in a commercial building in Corvallis, Oregon. A specified compressive strength, f’c , of 4000 psi is required at 28 days using an ASTM C 150 Type I. The design calls for a minimum of 3 in. of concrete cover over the reinforcing steel. The minimum distance between reinforcing bars is 2.5 in. A slump of 4 inches should be the target. No statistical data on previous mixes are available. Follow mixture...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT