Question

A westbound section of freeway currently has three 12-ft wide lanes, a 6-ft right shoulder, and...

A westbound section of freeway currently has three 12-ft wide lanes, a 6-ft right shoulder, and no ramps within 3 miles upstream and downstream of the segment midpoint. It is on rolling terrain with 10% heavy vehicles and is operating at capacity with a peak-hour factor of 0.900. If the road is expanded to four 11-ft lanes with a 2-ft right shoulder, and traffic after the expansion is projected to increase by 10% with the same heavy vehicle percentage and peak hour factor, what is the new LOS and estimated density?

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes...
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes with a 4-ft right-side shoulder. The total ramp density is 1.5 ramps per mile. The directional peak-hour traffic volume is 5400 vehicles with 11% heavy vehicles. The peak-hour factor is 0.95. It has been decided that heavy vehicles will be banned from the freeway during the peak hour. What will the freeway’s density and level of service ben before and after the ban? (Assume...
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes...
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes with a 4- ft right-side shoulder. The total ramp density is 1.5 ramps per mile. The directional peak-hour traffic volume is 5400 vehicles with 11% heavy vehicles. The peak 15-minute volume is 1421 vehicles. What are the freeway’s density and level of service
A freeway segment has the following characteristics: 3 lanes in each direction Lane width = 11...
A freeway segment has the following characteristics: 3 lanes in each direction Lane width = 11 ft Right shoulder width (lateral clearance) = 4 ft There is 1 interchange within 3 miles downstream, and 2 interchanges within 3 miles upstream. The freeway is located on a level terrain and has 10% of heavy vehicles in the traffic stream. Calculate the free-flow speed (FFS) for this freeway segment using the HCM formula (FFS = 75.4 – fLW – fLC – 3.22TRD0.84).
Determine the level of service for the following freeway segment: 6 total lanes (in both directions),...
Determine the level of service for the following freeway segment: 6 total lanes (in both directions), rolling terrain, 11' lanes, obstructions 2' from the right of the travel lane, 1.5 diamond interchanges per mile, commuter traffic. There are 15% large trucks and 15% RVs. The directional hourly volume is 2200 vehicles/hour. The peak hour factor is 0.70
A segment of four-lane freeway (two lanes in each direction) has a 3% upgrade that is...
A segment of four-lane freeway (two lanes in each direction) has a 3% upgrade that is 1500 ft long followed by a 1000-ft 4% upgrade. It has 12-ft lanes and 3-ft shoulders. The directional hourly traffic flow is 2000 vehicles with 3% SUTs and 3% TTs. The total ramp density for this freeway segment is 2.33 ramps per mile. if the peak-hour factor is 0.90, what is the level of service of this compound-grade freeway segment?
A segment of four-lane freeway (two lanes in each direction) has a 3% upgrade that is...
A segment of four-lane freeway (two lanes in each direction) has a 3% upgrade that is 1500 ft long followed by a 1000-ft 4% upgrade. It has 12-ft lanes and 3-ft shoulders. The directional hourly traffic flow is 2000 vehicles with 3% SUTs and 3% TTs. The total ramp density for this freeway segment is 2.33 ramps per mile. if the peak-hour factor is 0.90, what is the level of service of this compound-grade freeway segment?
A freeway segment has the following characteristics: Free flow speed of 65 mph; 3 lanes per...
A freeway segment has the following characteristics: Free flow speed of 65 mph; 3 lanes per direction; Located in rolling terrain; The traffic stream vehicle composition includes 12% trucks, 3% buses, and 85% passenger cars; Directional peak-hour volume of 4080 vehicles, with 1200 vehicles arriving in the highest 15-minute flow-rate period. Given these characteristics, calculate the analysis flow rate and determine the Level of Service (LOS) for the given peak hour conditions (write the letter corresponding to the LOS in...
A six-lane freeway is being designed for a location in rolling terrain. The expected free- flow...
A six-lane freeway is being designed for a location in rolling terrain. The expected free- flow speed is 65 mph. Lane widths will be 12 ft and right shoulder widths will be 6 ft. During the peak hour, it is expected there will be a directional peak- hour volume of 2700 vehicles with 12% heavy vehicles in the traffic stream. The PHF is expected to be 0.90. Determine level of service.
A segment of four-lane freeway (two lanes in each direction) has a 3% upgrade that is...
A segment of four-lane freeway (two lanes in each direction) has a 3% upgrade that is 450 m long followed by a 300-m 4% upgrade. It has 3.6 m lanes and 0.9 m shoulders. The directional hourly traffic flow is 2000 vehicles with 5% large trucks and buses (no recreational vehicles). The total ramp density for this freeway segment is 1.45 ramps per kilometer. If the peak hour factor is 0.9 and all of the drivers are regular users, what...
An urban circumferential freeway is to be designed on the basis of the following information: design...
An urban circumferential freeway is to be designed on the basis of the following information: design year average annual daily traffic, AADT = 75,000 veh/day; the estimate of the percent of traffic occurring during the peak-hour is 9%; the percent of peak-hour traffic in the heavier direction is estimated to be 55%. The traffic mixture is expected to be similar to the current mixture of 7% trucks, 3% buses and no recreational vehicles. The PHF is estimated to be 0.9....
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT