Question

Select the lightest available W12 shape (A992) to support a factored axial load of 650 kips...

Select the lightest available W12 shape (A992) to support a factored axial load of 650 kips and a factored uniform transverse load of 1.0 kip/ft. Bending takes place about the strong axis only. The member length is 20 ft. and K = 1.0 typically. Sidesway is prevented.

Homework Answers

Answer #1

GIVEN DATA

W12 SHAPE (A992)

AXIAL LOAD= 650 KIPS

TRANSVERSE LOAD= 1.0 KI/FT

THE MEMBER LENGTH= 20 FT AND K= 1.0

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A beam-column made of A992 steel needs to be able to carry an axial load (P)...
A beam-column made of A992 steel needs to be able to carry an axial load (P) of 60 kips and a strong axis bending moment (Mx) of 100 kip-ft. Lc = 15 feet. Lb = 15 feet. Pick an economical member that is capable of carrying these loads.
Select the lightest section to support a axial load (DL=500 kips y LL= 300 kips). The...
Select the lightest section to support a axial load (DL=500 kips y LL= 300 kips). The element is 30 ft length and braced in the y direction at 14 ft from the column base. The end support conditions are (fixed/pinned). Justify the material’s selection (Verify slenderness and local buckling)
select the lightest W shape to support a uniformly distributed load of 2.2 kips/ft. of a...
select the lightest W shape to support a uniformly distributed load of 2.2 kips/ft. of a simple span of 20 feet.
A 14ft pin-ended column in a braced frame must carry a compressive dead load of 65...
A 14ft pin-ended column in a braced frame must carry a compressive dead load of 65 kips and live load of 130 kips, along with a uniformly distributed transverse dead load of 0.5 kips/ft and live load of 2.5 kips/ft. Will a W12x58, ASTM A992 member be adequate if the transverse load is applied to put bending about the strong-axis? LRFD.
An A992 W21×111 is used as a column in a building to support a dead load...
An A992 W21×111 is used as a column in a building to support a dead load of 120 kips and a live load of 300 kips. The column effective length is 22 ft for the y-axis and 33 ft for the x-axis. Determine whether the column will support the load by LRFD.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT