Question

Identify two unit process used to thicken waste activated sludge and describe how each process functions.

Identify two unit process used to thicken waste activated sludge and describe how each process functions.

Homework Answers

Answer #1

In case of any query please comment. If you have liked the solution then please THUMBS UP.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Two types of flow regime are normally used in the design of an activated sludge process,...
Two types of flow regime are normally used in the design of an activated sludge process, namely completely mixed and plug flow (both are continuous). Using first order kinetic reaction, demonstrate which flow regime provide a better performance, given the followings: Q = 550 m3/d t = 6 hours Co = 225 mg/L k = 0.15 d-1
A wastewater plant with the activated sludge process received 5 × 106 L/day of wastewater with...
A wastewater plant with the activated sludge process received 5 × 106 L/day of wastewater with a BOD5 of 500 mg/L. The primary clarifier removes 30% of the BOD and primary clarify effluent has no biomass (Xi=0 mg/L). Recycle (Qr) and waste sludge (Qw) flows are 25% and 2% of Qin, respectively. Effluent BOD5 from secondary clarifier and waste sludge is 20 mg/L. Microorganism concentration in the waste sludge (Xw) is 6,000 mg/L. Soluble BOD5 is biologically converted into CO2...
An activated sludge process is being used to treat wastewater from a small town of 50,000...
An activated sludge process is being used to treat wastewater from a small town of 50,000 people, which includes intermittent industrial discharges that may have a toxic impact on the performance of the wastewater treatment plant(WWTP) a) What type of online equipment would you recommended be installed for early warnings of wastewater treatment failutre? b) Which parameters would you recommend be measured and where would these be positioned in the WWTP?
An activated sludge process is being used to treat wastewater from a small town of 50,000...
An activated sludge process is being used to treat wastewater from a small town of 50,000 people, which includes intermittent industrial discharges that may have a toxic impact on the performance of the wastewater treatment plant(WWTP) a) What type of online equipment would you recommended be installed for early warnings of wastewater treatment failutre? b) Which parameters would you recommend be measured and where would these be positioned in the WWTP?
Design a completely mixed activated sludge process using three different design approaches (i.e. calculate the volume...
Design a completely mixed activated sludge process using three different design approaches (i.e. calculate the volume of the aeration basin). Base your design for the first approach on detention time, for the second one on BOD loading, and the third one on kinetics. The influent design flow rate to the activated sludge process is 10,000 m3 /day with a BOD5 concentration of 200mg/L. Completely mixed activated sludge processes typically have a detention time ranging from 3 to 6 hours and...
ANSWER as much as possible: Design an activated sludge process consisting of a complete mix flow...
ANSWER as much as possible: Design an activated sludge process consisting of a complete mix flow through aeration tank followed by final settling tanks. The sizing of the reactor and all appurtenances should be based on a solids retention time, (SRT), of 4 days and the particulates given below. Biological characteristics: Ks = 20 mg/L COD, kd = 0.1 per day, mumax = 3 gVSS/gVSS-day,    Y = 0.4 gVSS/gCOD Primary settling Tank Effluent Characteristics: Q= 20MGD, biodegradable COD, bCOD...
1: Identify and describe the two general functions of statistics.
1: Identify and describe the two general functions of statistics.
Identify and describe the different types of committees and their functions, and assess their function in...
Identify and describe the different types of committees and their functions, and assess their function in the lawmaking process.
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater...
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater having a BOD5 concentration of 250 mg/L following primary treatment. The NPDES permit requirement for effluent BOD5 and TSS is 20 mg/L for each. The biokinetic parameters have been established as: yield = 0.6 , k = 5/d, Ks = 60 mg/L, and kd = 0.06/d. The MLVSS concentration in the aeration tank is to be maintained at 3000 mg/L and the ratio of...
Money that was being used, namely cigarettes. Describe how cigarettes addressed each of the 3 functions...
Money that was being used, namely cigarettes. Describe how cigarettes addressed each of the 3 functions of money. What function were cigarettes best and worst at satisfying? Has there ever been a situation where you have used a nonconventional form of money? Use the Radford article to support your position.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT