Question

A laminate is composed of one layer of M-1500, one layer of XM2415 and 2 layers...

A laminate is composed of one layer of M-1500, one layer of XM2415 and 2 layers of CM-3610. What is the thickness of the laminate? What is the elastic modulus in the longitudinal direction? What is the elastic modulus in the transverse direction?

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

this problem is related to marine composite structures.

in this problem , we found the properties of all material used in laminate .

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
a wall is made with three layers of material. The tempurature on one side of the...
a wall is made with three layers of material. The tempurature on one side of the wall is 30 degrees celcius and on the other side is -15 degrees celcius. Starting at the warm side, the first material has a thickness L1 and the thermal conductivity k1, the second material has thickness L2= 0.7L1 and thermal conductivity k2=0.9k1, and tge third material (one the cold side of the wall) has L3= 0.35L1 and thermal conductivity k3=0.8k1. What is the temperature...
14. One pavement structure consisting of 2 pavement layers over subgrade has a required structural number...
14. One pavement structure consisting of 2 pavement layers over subgrade has a required structural number (SN) of 5.60. The maximum thickness for granular base is 26 in. Layer coefficient for asphalt surface (a1)is 0.44 and for granular base (a2) is 0.14. The drainage modifying factor is 1.00. Assuming there are two design options for asphalt surface: (a) thickness of 4 in; (b) thickness of 5 in. Determine which design is preferred for asphalt surface and justify your choice with...
It is a question about the thermal heat transfer problem. A wall consists of 2 layers...
It is a question about the thermal heat transfer problem. A wall consists of 2 layers in parallel: A=3m^2 and B=7m^2. The indoor air temperature and outdoor air temperature are 20C and 10C, respectively. The rate of heat flow through the whole wall is not to exceed 50W by adding a thermal insulation on the wall ( on both A and B), What is the required thickness of the thermal insulation layer? The thermal conductivity of the thermal insulation layer...
Calculate the combined R value of one layer of goose down, 6 cm thick, and one...
Calculate the combined R value of one layer of goose down, 6 cm thick, and one layer of wool, 3.4 cm thick. _______ m^2*K/ W
A waste tank containing a liquid of Bromide at a concentration of 1500 mg/L was released...
A waste tank containing a liquid of Bromide at a concentration of 1500 mg/L was released into a shallow disposal pit which is overlain by 2 m thick aquifer at a discharge rate of 4 m3/day for many years. The average linear groundwater velocity is 0.2 m/day. Also, assume that transverse dispersion in 20% of the longitudinal dispersion. Assume that disposal pit is located at xo = 0 and yo = 0. What would be the concentration of Bromide in...
A vertical 1 m high, 2 m wide double pane window consists of two layers of...
A vertical 1 m high, 2 m wide double pane window consists of two layers of glass separated by 3 cm air gap at atmospheric pressure. The inner and outer glass temperature are 18 ℃ and 4 ℃, respectively Using MATLAB SOFTWARE (a) determine the rate of heat loss through the window by natural convection for vertical and horizontal orientation (b) Determine percent reduction in heat transfer loss for the vertical enclosure compared to horizontal enclosure
10. Air is to be heated by passing it over a bank of 2.8-m-long tubes inside...
10. Air is to be heated by passing it over a bank of 2.8-m-long tubes inside which steam is condensing at 90ºC. Air approaches the tube bank in the normal direction at 20ºC and 1 atm with a mean velocity of 5.2 m/s. The outer diameter of the tubes is 1.6 cm, and the tubes are arranged staggered with longitudinal and transverse pitches of SL = ST= 4 cm. There are 30 rows in the flow direction with 10 tubes...
1-a body with m = 3 Kg and it's velocity at certain time is 9 m/s...
1-a body with m = 3 Kg and it's velocity at certain time is 9 m/s and he cross a distance 18 m at 3 second , tell what is the force acting on it and find the magnitude of the force . 2- a thin plate with area 0.08 m2 , isolated from another plate by liquid layer with thickness 3 mm. if a tangent force acting on it by 6.3 N the it moved by velocity 33 cm/s,...
#1: A mass of 6 kg is attached to a spring with k = 1500 N/m....
#1: A mass of 6 kg is attached to a spring with k = 1500 N/m. It is stretched a distance of 0.5 m and is released so that it oscillates in simple harmonic motion. A) What is the frequency? B) What is the energy of the oscillator? C) What is the maximum velocity for the oscillator? #2:  When at x = 0.3 m a simple harmonic oscillator (k = 2000 N/m and m = 2 kg) has a velocity of...
A spring-mass system is composed of a mass m = 200 g and a massless spring...
A spring-mass system is composed of a mass m = 200 g and a massless spring of force constant k obeying Hooke’s Law, and the whole system is located on a horizontal frictionless table. The mass m makes oscillations about the equilibrium position x = 0 according to the relation x(t) = (15 cm) sin 2πt. (You can take π = 3.) What is the force constant k of the spring? (a) 36/5 N/m   (b) 36 N/m   (c) 54 N/m  ...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT