Question

A settling chamber is measuring 6 meters in length, 3 meters in width, and 1.5 meters...

A settling chamber is measuring 6 meters in length, 3 meters in width, and 1.5 meters in height. The air stream flowrate entering the chamber is 17 m3/s, and the average particle size (diameter) is 65 micrometers. Assume a particle density of 1800 kg/m3 and that Stokes law applies.

Some properties of air:

Atmospheric pressure = 101.4 kPa = 14.7 psi

Air density = 1.2 kg/m3.

Air viscosity = 1.85x 10^-5 Pa.s.

  1. the air stream horizontal velocity in the chamber in m/s.
  2. the particle settling velocity in m/s.
  3. the particulate matter removal efficiency of the settling chamber.

Homework Answers

Answer #1

PLEASE RATE POSITIVELY

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A cylindrical fluidized bed of diameter 0.5 m is used in flour mill for flour production....
A cylindrical fluidized bed of diameter 0.5 m is used in flour mill for flour production. Air of density 1.2 kg/m3 and viscosity 1.84 x 10-5 Pa.s is fluidizing the flour powder of mean sieve size 60 µm and particle density 1800 kg/m3 . 240 kg of flour powder is charged to the bed and air flowrate to the bed is 140 m3 /hr. The average bed voidage at incipient fluidization is 0.45. Compute the following problems: (a) the minimum...
There is a gas cylinder filled with oxygen in front of you. It is 1.5 meters...
There is a gas cylinder filled with oxygen in front of you. It is 1.5 meters tall and 30 cm in diameter. The oxygen within the culinder has dropped to a gauge pressure of 2.52x10^6 Pa at a temperature of 20 C. This pressure is insufficient to ventilate a patient in respiratory distress. Youdo not have another oxygen cylinder present, and without oxygen the patient will die. a. To maintain minimal ventilation, the pressure must be raised to a gauge...
A shell and-tube heat exchanger is required for the following service: Hot stream Cold Stream Aromatic...
A shell and-tube heat exchanger is required for the following service: Hot stream Cold Stream Aromatic Stream Cooling Water inlet Temperature (oC) 85 20 outlet Temperature (oC) 40 35 Mass Flowrate x heat Capacity (kW/oC) 85.2 Hot Stream cold stream (Cooling water) Heat Capacity (J/kg K) 2840 4193 Density (kg/m3) 750 999 Viscosity (cP) 0.34 1.016 Thermal conductivity (W/m.K) 0.19 0.594 Fouling Factor (m2.oC/W 0.00018 0.000176 ? The cooling water is allocated to the tube-side of the exchanger. ? It...