Question

A sandy soil has a maximum void ratio (emax) of 0.63 and a minimum void ratio...

A sandy soil has a maximum void ratio (emax) of 0.63 and a minimum void ratio (emin) of 0.36. The soil is compacted to a dry unit of 17.8 Kn/m3 at a moisture content of 18%. The specific gravity of the solids is 2.7. What is the relative density of the soil after compaction?

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

Solution:

Answer: The relative density of soil after compaction = 0.55

Detailed solution is provided in the images below.

Please go through it and if you have any questions, feel free to ask.

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
At a borrow site, sandy soil was excavated. The soil had a total unit weight (γt)...
At a borrow site, sandy soil was excavated. The soil had a total unit weight (γt) of 124.3 pcf, a water content (ω) of 12.3%, and a specific gravity (GS) of 2.66. The soil was then dried, the maximum and minimum void ratio tests were performed, and eMAX = 0.564 and eMIN = 0.497 were obtained. Determine the relative density of the soil at the borrow site. Assume a volume of solids of 1 ft3.
By solving the given below problem justify how void ratio of the soil is important in...
By solving the given below problem justify how void ratio of the soil is important in the calculation of other index properties of soil? Problem: A soil sample has a total unit weight of 16.97 kN/m3 and a void ratio of 0.84. The specific gravity of solids is 2.70. Determine the moisture content, dry unit weight and degree of saturation of the sample.
A field density test on compacted, well-graded sand produced the following information: water content = 5%,...
A field density test on compacted, well-graded sand produced the following information: water content = 5%, total density = 112 pcf. Additional standardized tests were performed for determining the sand's relative density following ASTM D4253 and D4254, and these standardized tests produced a minimum dry density of 89 pcf and a maximum dry density of 115 pcf. The specific gravity of solids is 2.65 for this soil.Compute (a) the field dry density and void ratio, (b) min and max void...
In a Proctor compaction test, the optimum water content of a fill material is found as...
In a Proctor compaction test, the optimum water content of a fill material is found as 12%. Specific gravity of solids is 2.6, maximum void ratio is 0.93, and minimum void ratio is 0.53. A 2.4m (height) x 30m x 30m embankment of this soil is to be compacted to 90% relative density. a)The embankment will be compacted in 8 layers of 30cm thickness.Calculate the quantity of water to be added to each layer for the most efficient compaction. b)You...
Soil Mechanics Question (Civil Engineering) 1) A specimen of compacted soil has a mass of 1.906...
Soil Mechanics Question (Civil Engineering) 1) A specimen of compacted soil has a mass of 1.906 kg, a volume of 944 cc, water content of 10% and 2.68 specific gravity of solids. Determine the bulk density, dry density, void ratio and degree of saturation.
For a moist soil, given total volume V = 0.22 m3; total weight W 3.124 kN;...
For a moist soil, given total volume V = 0.22 m3; total weight W 3.124 kN; moisture content w = 15% and specific gravity of soil solids, G = 2.65. Calculate the moist unit weight, dry unit weight ,void ratio, porosity, and degree of saturation.
Q1. Complete the following table, provided for a sandy soil (Gs =2.65). Accordingly, find the dry...
Q1. Complete the following table, provided for a sandy soil (Gs =2.65). Accordingly, find the dry unit weigh of this soil. Mass (t) Vol. (m3) Air 13.46 Water 13.25 Solids 50.00 Total Q2. A soil specimen has a moisture content of 21%, a void ratio of 0.6, and a specific gravity of 2.7. Determine the bulk unit weight of this soil. Q3. If we are dealing with a very soft clay soil in the site, which field test equipment will...
A contractor has compacted the base course for a new road and found that the mean...
A contractor has compacted the base course for a new road and found that the mean value of the test samples has the moisture content = 19.4%, specific gravity = 2.78, and bulk soil density = 16.4 kN/m3. The specifications require that the void ratio should not exceed 0.80. Check whether the contractor met the specifications or not? Unit weight of water is 9.81 kN/m3. Based on the given data and assuming volume of soil is 1m3 , determine the...
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with...
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with a volume of 1/30 cubic foot which uses 4 layers to place soil in the mold and compacts each layer using a hammer with a weight of 10 lbs that is dropped 12 inches and uses 20 blows per layer. (2 pts) 2. Using the result from question 1 compare the compaction energy to the Modified Proctor compaction test and the Standard Proctor compaction...
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with...
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with a volume of 1/30 cubic foot which uses 4 layers to place soil in the mold and compacts each layer using a hammer with a weight of 10 lbs that is dropped 12 inches and uses 20 blows per layer. (2 pts) 2. Using the result from question 1 compare the compaction energy to the Modified Proctor compaction test and the Standard Proctor compaction...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT