Question

The nitrogen and phosphorus requirement (in mg/L) for balanced microbial growth of a wastewater with BOD5...

The nitrogen and phosphorus requirement (in mg/L) for balanced microbial growth of a wastewater with BOD5 of 800 mg/L is most nearly

Homework Answers

Answer #1

Nutrient balance is an important issue since microbes require a particular nutrient ratio in order to carry out their activities at optimum efficiency.

Carbon, nitrogen and phosphorous are the most important of these nutrients and C:N:P ratios between 100:5:1 and 100:10:1 should be maintained in order to ensure maximum microbial activity in aerobic wastewater treatment.

Assume CNP ratio as 100:5:1

Nitrogen and Phosphorus requirement = (5+1)/(100+5+1) * 800 = 45.283 mg/L

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A domestic wastewater source has 550 mg L-1 BOD, 60 mg L-1 total nitrogen (comprising Total...
A domestic wastewater source has 550 mg L-1 BOD, 60 mg L-1 total nitrogen (comprising Total Kjeldahl Nitrogen (TKN), nitrate and nitrite, and ammonia) and 15 mg L-1 soluble phosphorus (SP). These parameters need to be brought to < 30 mg L-1 BOD, < 15 mg L-1 for total nitrogen, <1 mg L-1 for ammonia, and < 2.5 mg L-1 for SP before being discharged into a local river. Investigate possible wastewater treatment methods that could be applied to remove...
Explain how the following chemicals are important in microbial growth: carbon, phosphorus, oxygen, sulfur, and nitrogen.
Explain how the following chemicals are important in microbial growth: carbon, phosphorus, oxygen, sulfur, and nitrogen.
A municipal wastewater having a BOD5 of 225 mg/L is to be treated by a two-stage...
A municipal wastewater having a BOD5 of 225 mg/L is to be treated by a two-stage trickling filter. The desired effluent quality is 30 mg/L of BOD5. If both of the filter depths are to be 1.83 m and the recirculation ratio is 2:1, find the required filter diameters if both the two trickling filers have same removal efficiencies. Use NRC equation and the following design assumptions. Design assumptions: o Influent flow = 10,000 m3 /d o Recirculation ratio =...
A pond contains a total nitrogen concentration of 25 mg/L as N, and a phosphorus concentration...
A pond contains a total nitrogen concentration of 25 mg/L as N, and a phosphorus concentration of 10 mg/L as P. Based on the following stoichiometric formula… Determine which is the limiting nutrient. Calculate the mass of algae that would be produced per liter of water if all of the limiting nutrient were assimilated into new algae cells. C106H263O110N16P
A wastewater plant with the activated sludge process received 5 × 106 L/day of wastewater with...
A wastewater plant with the activated sludge process received 5 × 106 L/day of wastewater with a BOD5 of 500 mg/L. The primary clarifier removes 30% of the BOD and primary clarify effluent has no biomass (Xi=0 mg/L). Recycle (Qr) and waste sludge (Qw) flows are 25% and 2% of Qin, respectively. Effluent BOD5 from secondary clarifier and waste sludge is 20 mg/L. Microorganism concentration in the waste sludge (Xw) is 6,000 mg/L. Soluble BOD5 is biologically converted into CO2...
A wastewater treatment plant discharges total phosphorus in its effluent throughout the year into a nearby...
A wastewater treatment plant discharges total phosphorus in its effluent throughout the year into a nearby river. The treatment plant produces flows of 6 MGD with a total phosphorus concentration of 4.0 mg/L. The receiving river has an upstream flow of 200 ft3/sec and a background concentration of total phosphorus of 0.3 mg/L. Determine the concentration (in mg/L) of total phosphorus in the river at a point downstream of the effluent location.
Environmental Engineering biological processes, A wastewater with a COD concentration of 970 mg / L 8,000...
Environmental Engineering biological processes, A wastewater with a COD concentration of 970 mg / L 8,000 m3 / day flow, fully mixed back It will be treated in a cyclic activated sludge system.Treatment system mud age will be 5 days will be designed in a way. Kinetic and stoichiometric coefficients were determined as follows. Volumetric organic loading speed: 0,5 kg COD/m3.day uH : 3,7 day-1, bH: 0,04 day-1, KS: 45 mg COD/L, YH: 0,5 g VSS/g COD VSS/TSS: 0,8 mg...
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5...
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5 is 200 mg/L and the effluent soluble BOD5 is 8 mg/L. The plant is designed to operate with a mean cell (biomass) residence time of 10 days. The yield coefficient is 0.6 mg biomass/mg substrate, and the biomass decay rate is 0.09/day. The reactor is to operate at a biomass concentration of 2500 mg/L. The thickened underflow biomass concentration from the secondary clarifier is...
An activated sludge tank has the following characteristics: Q = 4.18 m3/sec; Influent BOD5 = 225...
An activated sludge tank has the following characteristics: Q = 4.18 m3/sec; Influent BOD5 = 225 mg/L; Effluent BOD5 = 4.5 mg/L; Ks = 100 mg/L; μm = 2.5 day-1; kd = 0.05 day-1. The mean cell residence time (MCRT) in days is most nearly: a.12.4 b.7.0 c.2.5 d.17.4 QUESTION 38 The hydraulic detention time, θc, of the activated sludge tank above (in Question #37) in hours is most nearly: (Note: Cells in the activated sludge tank, X = 3,500...
Determine the total nitrogen concentration in mg/L of a water sample containing 1.3 mg/L ammonia, 0.25...
Determine the total nitrogen concentration in mg/L of a water sample containing 1.3 mg/L ammonia, 0.25 mg/L nitrite, 15.1 mg/L nitrate, and 0.9 mg/L organic nitrogen.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT