Question

Design a suitable cross drainage works with the following data: Canal: discharge= 56 m3/s Bed width...

Design a suitable cross drainage works with the following data:

  • Canal: discharge= 56 m3/s
  • Bed width = 32 m
  • F.S. depth = 1.98 m
  • R.L. of Bed = 267.0 m
  • Drainage: High flood discharge= 425 m3/s
  • HFL = 268.2 m
  • Bed level = 265.5 m
  • Ground level = 267.2 m
Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of...
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of 3m, 3:1 side slopes (i.e. Z = 3), a longitudinal bed slope of 0.0009 m/m with a Manning’s roughness coefficient of 0.025 (i.e. sand). State the normal flow depth (yn) critical flow depth (yc) and the Froude Number of the flowing water.
Design a canal culvert 75 metres long to pass a normal full supply discharge of 4...
Design a canal culvert 75 metres long to pass a normal full supply discharge of 4 m3/s with 0.3m head loss. The upstream and downstream canal parameters are as given in the following. Ymax=1.40 m Vmax=0.830 m/s Ymin=1.05 m V min =0.74 m/s At 5 m3/s, the normal upstream depth of flow = 1.28 m, assume a square box section DxD is to be used with a rounded entrance so that K1=0.30. if R = D/4 for a single box...
2. A perennial stream has the following properties: discharge Q = 1000 ft3/s, bottom width b...
2. A perennial stream has the following properties: discharge Q = 1000 ft3/s, bottom width b = 150 ft, side slope z = 2, bottom slope So = 0.00038, and Manning's n = 0.035. A 6-ft high diversion dam is planned on the stream to raise the head for an irrigation canal.  Calculate the normal depth.  Calculate the total length of the M1 water-surface profile. Use n = 400 and m = 400.  Calculate the partial length...
an water vertical sluis gate freely 56 m3/s into a rectangular channel 7 m wide ....
an water vertical sluis gate freely 56 m3/s into a rectangular channel 7 m wide . the gate whic is the same width as the channel is set at a height of 1.4m above the bed and the depth at the vena contracta is .85 m the energy loss in the converging flow at a sluis is quite small so take the head loss B as .05v2 / 2g the normal depth in the downstream hz=2.6m 1. calculate the depth...
Please answer the following Case analysis questions 1-How is New Balance performing compared to its primary...
Please answer the following Case analysis questions 1-How is New Balance performing compared to its primary rivals? How will the acquisition of Reebok by Adidas impact the structure of the athletic shoe industry? Is this likely to be favorable or unfavorable for New Balance? 2- What issues does New Balance management need to address? 3-What recommendations would you make to New Balance Management? What does New Balance need to do to continue to be successful? Should management continue to invest...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT