Question

if we have in the beam cross-section three or more layer of steel bars,,,, what will...

if we have in the beam cross-section three or more layer of steel bars,,,, what will be the effective depth in this case? Show drawings if possible

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
. A rectangular beam of size 300 * 600 mm is reinforced with steel bars of...
. A rectangular beam of size 300 * 600 mm is reinforced with steel bars of area 1530 mm^2. Concrete of Grade C-25 and steel of Grade 420 is to be used. Depth of neutral axis (y-dash) is found to be 312 mm. Find the stress at the bottom of the section, if applied bending moment is 45 KN-m.
Determine the cracking stress of concrete in a reinforced beam of rectangular section of breadth 250mm,...
Determine the cracking stress of concrete in a reinforced beam of rectangular section of breadth 250mm, gross depth 450mm, and effective cover to reinforcement 40mm. the beam contains 4N16 bars all arranged in one layer in tension face. Take the concrete is N32 grade.
Knowing that the reinforced concrete beam cross section effective depth is d = 310 mm and...
Knowing that the reinforced concrete beam cross section effective depth is d = 310 mm and the properties of materials used are f'c = 28 MPa and fy = 420MPa and the external ultimate bending moment Mu = 254 KN.m with strain in tension steel reinforcement equal to 0.005 . The width of the beam is Select one : a . 511 b . 385 c . 460 mm d . 640
A double reinforce beam has a cross section 40cm×60cm and provided with steel bar 6 and...
A double reinforce beam has a cross section 40cm×60cm and provided with steel bar 6 and 3 in numbers in tensile and compressive sides respectively. The bar are 2.2cm diameter. Find the moment of resistance and the external load per meter run . Take compressive cover as 7.5cm , m=18, c=48kg/cm² and span= 9.2m. (note ; we have exam right now please help)????as soon as.possible))
a 21.00 m steel beam with 6.00 cm x 6.000 cm cross-section is supported at opposite...
a 21.00 m steel beam with 6.00 cm x 6.000 cm cross-section is supported at opposite ends by two wires of equal length but of different composition in diameter. One wire composed of copper has a diameter of .8500 mm The other wire is made of aluminum. If the steel beam remains perfectly level find the diameter of the aluminum wire
A beam of square cross section, 10 x 10 cm and length 5 m has a...
A beam of square cross section, 10 x 10 cm and length 5 m has a Young’s modulus of 200 GPa and density 7800 kg/m3. For a case of simply supported ends determine the first three natural frequencies and correspondent modes shapes.
7.4 What is your recommendation for the maximum size of coarse aggregate for the following situation?...
7.4 What is your recommendation for the maximum size of coarse aggregate for the following situation? A continuously reinforced concrete pavement cross-section contains a layer of 19-mm reinforcing bars at 150 mm. centers, such that the steel is just above mid-depth of a 250 mm. thick slab. Cover over the top of the steel is therefore about 100 mm.
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of...
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of 450 mm x 660 mm (b = 450 mm and D = 660 mm). The length of the beam is 5 m. The elastic modulus of the concrete is 32.8 GPa. A uniformly distributed live load of 23 kN/m is acting on the beam. Determine (a) the design bending moment on this beam for strength limit state, (b) modular ratio assuming Es = 200...
Please show all your work!! In a certain process, steel bars are manufactured and subjected to...
Please show all your work!! In a certain process, steel bars are manufactured and subjected to a torsion test. Bars are considered acceptable if they support at least 15 lb-ft. Currently the process produces bars that support on average 15.23 lb-ft with a variance of 0.04 lb-ft ^ 2 a)what proportion of the bars will not be able to meet the specifications b)if we take a sample of 50 bars, how many are expected to fail the test c)if we...
Steel design Why do we design for a fully braced lateral beam? Lb = 0 What...
Steel design Why do we design for a fully braced lateral beam? Lb = 0 What is the reason?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT