Question

Q.2. If fc = X psi and Vu = V (k). Select the rectanngualr beam section...

Q.2. If fc = X psi and Vu = V (k). Select the rectanngualr beam section for which no shear reinforcement required . Take b = ½ d                             

Vu= v (K)

X (psi)

60

4000

Please solve with all steps

Homework Answers

Answer #1

Given:

  • fc = 4000psi
  • Vu= V(k) = 60 k
  • b=0.5d

Solution:

Shear strength provided by concrete is,

  

But ACI Code 11.4.6.1 states that minimum area of shear reinforcement is provided if Vu exceeds .

Let us consider,   

We know that, b=0.5d.

So, take

Let us take, b = 30 inch

d = 60 inch

D = 60+3 = 63 inch.

We need rectangular beam section of (30-inch x 63-inch).

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Please select the reinforcement spacing for the entire span of a simply supported beam on a...
Please select the reinforcement spacing for the entire span of a simply supported beam on a 22 ft span. Use the detailed method to calculate Vc. Do not use a shear envelope diagram use the regular shear force diagram. Use b = 16 in., d = 27 in., the main bending reinforcement consists of 4 #9 bars. The unfactored dead and live loads are 2.6 Kip/ft and 2.5 kip/ft, respectively, f’c = 4500 psi, and fy = 60,000 psi. Use...
Problem 3 A reinforced concrete beam is cantilevered over a span of 10 ft. The beam...
Problem 3 A reinforced concrete beam is cantilevered over a span of 10 ft. The beam width is 14”. The beam is supposed to carry a uniformly distributed service dead load of 1.2 k/ft and a uniformly distributed service live load of 0.5 k/ft over its entire span. The dead load includes an allowance for the beam weight. Assume 60- ksi steel and 4,000-psi concrete. 1.Use the design equations to determine the minimum required effective depth (d). 2.Select the tensile...
Design a rectangular reinforced concrete beam for Mu = 550 k-ft (not including self-weight). Use f’c...
Design a rectangular reinforced concrete beam for Mu = 550 k-ft (not including self-weight). Use f’c = 4000 psi and fy = 60,000 psi. Use a design ρ = 0.01. Using the method of bd2, and choosing a width b no smaller than 15 inches and no larger than 18 inches, design a beam to resist the moment. Save room for #3 stirrups. Report your final design and draw the cross-section labeling all dimensions and showing the rebar layout and...
a rectangular beam having dimensions: b=300mm and d=550mm, spans 6m face to face of simple supports....
a rectangular beam having dimensions: b=300mm and d=550mm, spans 6m face to face of simple supports. it is reinforced for flexure with 3D36mm bars that continue uninterrupted to the ends of the soan. it is to carry a service dead load of 23.8 KN/m (including self-weight) and a service lice load equal to 47.6 KN/m, both uniformly distributed along the span. use fc’=27.6 Mpa and fy=414.7 Mpa. Normal weight concrete will be used and diameter of stirrup are 10mm. 1.using...
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of...
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of 450 mm x 660 mm (b = 450 mm and D = 660 mm). The length of the beam is 5 m. The elastic modulus of the concrete is 32.8 GPa. A uniformly distributed live load of 23 kN/m is acting on the beam. Determine (a) the design bending moment on this beam for strength limit state, (b) modular ratio assuming Es = 200...
For a simple beam of 9 m long with the same cross-section as No. 2, determine...
For a simple beam of 9 m long with the same cross-section as No. 2, determine the spacing of the U-shaped, D-10 shear bars perpendicular to the member axis. D10 is used as the shearing rebar, and (required load acting on the member) and (fyt of the shearing rebar to be used) are as follows. wu = 71.9 kN/m, : No.2 >> b = 330 mm, h = 600 mm
1. A laser produces a beam of light with a circular cross-section with a radius of...
1. A laser produces a beam of light with a circular cross-section with a radius of 2.0 mm. If the peak electric field (the electric field amplitude) in the beam is 2300 V/m, then what is the total power delivered by the laser? 2.  In a series RLC circuit, suppose R = 300 W, L = 60 mH, C = 0.50 µF, and source voltage is Vs = (15 V)cos(20000?t). Find (a) voltage amplitudes across R, L, and C respectively, (b)...
In an RC series circuit, V = 24.0 V, resistance R = 47 K?, and capacitance...
In an RC series circuit, V = 24.0 V, resistance R = 47 K?, and capacitance C = 2200 ?F. (a) Calculate the time constant. (b) Define time constant in a complete sentence. (c) How long does it take for the capacitor to reach to its 63% of its maximum charge? (d) How long does it take for the capacitor to reach to its 75% of it maximum charge? (e) How much charge can be stored in the capacitor after...
2. Write the output matrix “v” t = [2:4]; k = [1:3]; v = t.*k –...
2. Write the output matrix “v” t = [2:4]; k = [1:3]; v = t.*k – k.^2 4. Given: D = [1 2 3 4 5 6 7 8 9] (3x3) . Which command will extract the submatrix [1 2 3 4 5 6] (2x3) ? a. D[1:2,1:3] b. D(1,2 ;1,3) c. [D(1:2),D(1:3)] d. D(1:2,1:3) 14. What will be the dimension of matrix B? B=[ones(3) zeros(3) rand(3); 2*eye(9)] 18. Find the value of “C” A=1:2:10; B=linspace(1,5,5); C = length(A)*B(2)+A(5)*B(3); 19....
given that a model potential can be written as v(x)=1/2kx^2 + 1/6k(3)x^3 given that k= 0.1...
given that a model potential can be written as v(x)=1/2kx^2 + 1/6k(3)x^3 given that k= 0.1 and k(3)= -0.2, graph the potential from -50<x<50. (a) for E>0 divide the v(x) into regions where the solution of Schrodinger's stationary state equation is either exponential or oscillatory also describe the behavior in each region (b) will the solutiosn of schrodingers equation for E>0 be bound or unbound and please explain why