Question

Waterisflowingina90°V-shapedcastironchannelwith a bottom slope of 0.002 at a rate of 3 m3/s. Calculate Froude number, normal...

  1. Waterisflowingina90°V-shapedcastironchannelwith a bottom slope of 0.002 at a rate of 3 m3/s. Calculate Froude number, normal and critical depths and state whether the flow is subcritical or supercritical.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

comment for any doubt about this solution thank you

Don't forget to upvote if you got your answer

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of...
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of 3m, 3:1 side slopes (i.e. Z = 3), a longitudinal bed slope of 0.0009 m/m with a Manning’s roughness coefficient of 0.025 (i.e. sand). State the normal flow depth (yn) critical flow depth (yc) and the Froude Number of the flowing water.
1) Determine the critical depth, critical slope and Froude Number at section y=0.4 m in a...
1) Determine the critical depth, critical slope and Froude Number at section y=0.4 m in a 1 m wide rectangular channel carrying 1.5 m3 /s. n=0.014. 2) Design a circular channel to convey Q=4 m3 /sec, in order to have maximum velocity. n=0.014, S0=0.008.. 3) Design a circular channel to convey flow rate Q=3 m3/sec, in order to have the flow depth y=1.5, n =0.014, bed slope 0.0006.
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n...
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n is 0.003. Determine the normal depth when the slope is 0.008. Check whether the flow is sub or supercritical. If the normal depth is to be kept at 2 m, determine the slope.
A. Starting from the specific energy equation [E = y + v2 /(2g)], drive an expression...
A. Starting from the specific energy equation [E = y + v2 /(2g)], drive an expression for the critical flow depth (yc) in a rectangular channel as a function of the flow rate /unit width (q). Proof also that Froude number in that case =1.0 B. A trapezoidal channel with a bottom width of 4 m and side slopes 4H: 1V carries a discharge of 30 m3 /s. The channel has bed slope= 0.1 % and manning roughness coefficient =...
A very long trapezoidal channel has a b = 20 ft, z = 5, S =...
A very long trapezoidal channel has a b = 20 ft, z = 5, S = 0.002 and n = 0.035. The steady state flow rate is 700 cfs. The channel terminates at a dam with a measured water surface depth of 10 feet. What is the point of control? Is the flow supercritical or subcritical? Calculate the water surface profile using the direct step procedure. What is the length of the channel?
A 10-m wide, rectangular, concrete-lined canal (n=0.013) has a bottom slope of 0.01 and a constant-level...
A 10-m wide, rectangular, concrete-lined canal (n=0.013) has a bottom slope of 0.01 and a constant-level lake at the upstream end. The steep canal carries a flow of is 250 m3/s and the critical and normal depths are 4m and 2.37m, respectively. The water level in the lake is 6.0 m above the bottom of the canal at the entrance. If the entrance losses are negligible, using Direct Step Method determine; i. The flow depth 812 m downstream of the...
The discharge in a channel with bottom width 3 m is 12 m3 s–1. If Manning’s...
The discharge in a channel with bottom width 3 m is 12 m3 s–1. If Manning’s n is 0.013 m-1/3 s and the streamwise slope is 1 in 200, find the normal depth if: (a) the channel has vertical sides (i.e. rectangular channel); (b) the channel is trapezoidal with side slopes 2H:1V. (Answer with steps plz)
A rectangular channel (n = 0.016 and b = 2.5m) that runs on a bed slope...
A rectangular channel (n = 0.016 and b = 2.5m) that runs on a bed slope of 0.004 has a flow depth of 1.2m. 1 Calculate flow rate for this channel 2. Decide whether the flow of this channel is supercritical or sub-critical 3. Compute critical depth and minimum specific energy for this channel 4. Compute critical bed slope and compare bed slope against the critical slope. Give a name to this slope type 5. Indicate given flow depth, critical...
Water flows in a rectangular channel in which the bottom width is b = 0.9 (m)....
Water flows in a rectangular channel in which the bottom width is b = 0.9 (m). The channel lining has an estimated Manning’s of n = 0.017, and the longitudinal slope of the channel is S% = 0.50. If the flowrate is Q = 1696 (L/s) and the depth of flow at a gaging station is Y = 0.22 (m), Calculate the critical depth yc Calculate the normal depth yn Classify the water surface profile. State whether the depth increases...
6. An overflow spillway flows into a mild channel, producing a hydraulic jump. The channel is...
6. An overflow spillway flows into a mild channel, producing a hydraulic jump. The channel is rectangular, with Q = 100 ft3/s, bottom width b = 20 ft, and Manning's n = 0.015. The flow depth at the toe of the spillway is 0.4 ft and the approximate slope at the toe of the spillway is 0.1. The slope of the [mild] downstream channel, which functions as a stilling basin, is 0.0001. Calculate:  the critical depth,  the length...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT