Question

5. A house is situated 20 m above the datum. It has to be supplied water...

5. A house is situated 20 m above the datum. It has to be supplied water from nearby
reservoir. The pipe length from the reservoir to the house is 200 m, diameter is 30 cm,
flow has to be 0.2 m3/s. Friction loss allowed is 5+Z m and the pressure to be maintained
in the pipe in the house is 20 kN/m2. Also consider minor losses (entrance and outlet).
Calculate the height the reservoir has to be situated above the datum? Water in
reservoir is at atmospheric pressure. Calculate lambda (λ) of the pipeline. (Z is the last 3
digits in your ID in mm
ID:112816

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A house is situated 20 m above the datum. It has to be supplied water from...
A house is situated 20 m above the datum. It has to be supplied water from nearby reservoir. The pipe length from the reservoir to the house is 200 m, diameter is 30 cm, flow has to be 0.2 m3/s. Friction loss allowed is 5+Z m and the pressure to be maintained in the pipe in the house is 20 kN/m2. Also consider minor losses (entrance and outlet). Calculate the height the reservoir has to be situated above the datum?...
A steel pipeline conveys water (density 1000 kg/m3 , bulk modulus 2.05x109 N/m2 ) from an...
A steel pipeline conveys water (density 1000 kg/m3 , bulk modulus 2.05x109 N/m2 ) from an upper to a lower reservoir the pipeline material is steel with Young’s modulus 210x109 N/m2 . It is 611 m long, has an internal diameter 1.1m, wall thickness 25 mm and surface roughness 0.68 mm. The flow is controlled by a valve located at the entrance to the lower reservoir, 211 m below the surface level in the upper reservoir. (a) Under steady flow...
A bathtub spigot in a top floor apartment lies 20 m above street level, where water...
A bathtub spigot in a top floor apartment lies 20 m above street level, where water is pumped into the apartment building. The pipe that leads into the building has an inner radius of 0.57 cm , which tapers to 0.40 cm at the bathtub spigot opening. The speed of the water leaving the spigot is 12 m/s . (The density of water is 1000 kg/m 3 .) Assume the water flows without viscosity. (a) What is the speed of...
1) a water flow with a pipe has rides ( 1 cm ) by initial velocity...
1) a water flow with a pipe has rides ( 1 cm ) by initial velocity ( 0.7 m/s ) to fill a tank with ( 20 Liter ), calculate the needed time to fill this 20 liter tank . 2) a water flow inside a pipe with velocity ( 4.2 m/s ) and the pressure on pipe entrance is 84 kPa , if the pipe rise up to ( ( 4m ) So that the velocity became ( 2.8...
8. A concrete dam of rectangular section 20+X m high and 6 m wide has water...
8. A concrete dam of rectangular section 20+X m high and 6 m wide has water standing 2 m below its top. If the coefficient of friction between the dam and the soil is 0.7, check the stability of the dam. The weight of masonry is 20 kN per cubic meter. (X is the last digit of your ID in m) ID:11416
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT