Question

Envriromental Engineering ( wastewater treatment ) A high-rate aeration system produces 1140 m3/d of waste sludge....

Envriromental Engineering ( wastewater treatment )

A high-rate aeration system produces 1140 m3/d of waste sludge. The sludge is wasted directly from the aerator and has a solids content of 3300 mg/L. This sludge is thickened by a dissolved air flotation unit to 3.0 percent solids. Determine the volume of the thickened sludge.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
environmental engineering wastewater treatment. waste water treatment. 1- In a 2 steps cascade aeration, each step...
environmental engineering wastewater treatment. waste water treatment. 1- In a 2 steps cascade aeration, each step increases oxygen concentration from 10 % to 30 % of saturation level. If the initial oxygen concentration is 20 % of saturation level and minimum oxygen is required to be 5 mg/L at the end of aeration, is the system efficient or not? Show your calculations. Inlet water temperature is 15 C (Cs = 10.2 mg/L) 2- Design flocculation tanks (2 tanks, 5 compartments...
Estimate the volume of air to be supplied (m3/d) for an activated sludge system with a...
Estimate the volume of air to be supplied (m3/d) for an activated sludge system with a flow of 0.25 m3/sec, net waste activated sludge production of 340 kg/day VSS, and an influent soluble BOD5 of 74 mg/L. Assume that soluble BOD5 is 58% of BODL, BOD5 in the aeration tank is 14 mg/L, and that the oxygen transfer efficiency is 9%. Density of air is 1.185 kg/m3, and air has 23.2% oxygen.
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater...
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater having a BOD5 concentration of 250 mg/L following primary treatment. The NPDES permit requirement for effluent BOD5 and TSS is 20 mg/L for each. The biokinetic parameters have been established as: yield = 0.6 , k = 5/d, Ks = 60 mg/L, and kd = 0.06/d. The MLVSS concentration in the aeration tank is to be maintained at 3000 mg/L and the ratio of...
Sooner City Reclamation Plant is a completely mixed activated sludge process designed to treat 20,000 m3/d...
Sooner City Reclamation Plant is a completely mixed activated sludge process designed to treat 20,000 m3/d of domestic wastewater having an influent BOD5 concentration of 350 mg/L (assume a 28.6% reduction in during primary treatment). Use typical activated sludge kinetic constants except for kd = 0.06 1/d. Assume that the MLVSS concentration in the aeration basin is maintained at 3,000 mg/L and the ratio of VSS:TSS is 0.75. Permit requires that the effluent BOD5 and TSS concentrations do not exceed...
A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process...
A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process followed by an activated sludge process composed of aeration tanks and a secondary clarifiers. This problem focuses on the activated sludge process. The activated sludge process receives a flow of 15 million gallons per day (MGD). The primary sedimentation process effluent has a BOD5 concentration of 180 mgBOD5/L (this concentration is often referred as S). Before flowing into the activated sludge process, the primary...
The town of Camp Verde has been directed to upgrade its primary Waste Water Treatment Plant...
The town of Camp Verde has been directed to upgrade its primary Waste Water Treatment Plant (WWTP) to a secondary plant that can meet an effluent standard of 25 mg/L BOD5 and 30 mg/L suspended solids. They have selected a completely mixed activated sludge system for the upgrade. The existing primary treatment plant has a flow rate of 0.029 m3/s. The effluent from the primary tank has a BOD5 of 240 mg/L. Using the following assumptions, estimate the required volume...
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5...
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5 is 200 mg/L and the effluent soluble BOD5 is 8 mg/L. The plant is designed to operate with a mean cell (biomass) residence time of 10 days. The yield coefficient is 0.6 mg biomass/mg substrate, and the biomass decay rate is 0.09/day. The reactor is to operate at a biomass concentration of 2500 mg/L. The thickened underflow biomass concentration from the secondary clarifier is...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process for a town of 40,000 people. The industrial flow contribution to the sewer system is 300,000 gallons per day. Effluent discharge standards require effluent BOD5 and total suspended solids concentration of <10 mg/l. Assume the following design criteria are applicable: Domestic sewage flow = 100 gal/cap/day (including I/I) BOD loading = 0.18 lbs/cap/day TSS loading = 0.20 lbs/cap/day BOD removal in primary = 33%...
Environmental Engineering biological processes, A wastewater with a COD concentration of 970 mg / L 8,000...
Environmental Engineering biological processes, A wastewater with a COD concentration of 970 mg / L 8,000 m3 / day flow, fully mixed back It will be treated in a cyclic activated sludge system.Treatment system mud age will be 5 days will be designed in a way. Kinetic and stoichiometric coefficients were determined as follows. Volumetric organic loading speed: 0,5 kg COD/m3.day uH : 3,7 day-1, bH: 0,04 day-1, KS: 45 mg COD/L, YH: 0,5 g VSS/g COD VSS/TSS: 0,8 mg...
An industrial wastewater flowing at a rate of 37,000 m3/day is contaminated by 187 mg/L of...
An industrial wastewater flowing at a rate of 37,000 m3/day is contaminated by 187 mg/L of propanol – CH3CH2CH2OH. As an environmental consultant, you propose to treat the water in an activated sludge process in which propanol is oxidized by oxygen into carbon dioxide – CO2. The reaction is highly favorable and assumed to be complete. a) Equilibrate the half-reactions and overall reaction that are expected to occur during the treatment process. b)Determine the theoretical quantity of oxygen (in mol/day)...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT