Question

A concrete pile 1-m diameter is driven 15-m in dense sand with following properties: γ=17.5 kN/m3,...

A concrete pile 1-m diameter is driven 15-m in dense sand with following properties: γ=17.5 kN/m3, φ=30o, K=0.90 and FS=3. Water is 5-m below the ground surface. Use typical values for any missing data. What is the design load for this pile?
Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 0.5 m in diameter concrete pile is to be driven in clayey soil with following...
A 0.5 m in diameter concrete pile is to be driven in clayey soil with following properties :qu= 150 kn/m^2 and unit weight =180.10 kn/m^3 the design capacity of pile is 1000 kn .what should be the length of pile for fs=2
A group of concrete piles (3×3) is driven into a uniform layer of medium dense sand,...
A group of concrete piles (3×3) is driven into a uniform layer of medium dense sand, which has a unit weight of gt = A kN/m3 and a friction angle of f = Bo. The water table is C m below the ground level. Each pile has a diameter of 400mm, a length of 10m. The centre-to-centre spacing of the piles is s = D m. Assume proper values for A, B, C and D. Calculate the ultimate vertical capacity...
1.) The pile load test data of a 300 mm diameter and 15 m long pile...
1.) The pile load test data of a 300 mm diameter and 15 m long pile is as follows . Design a pile group system to carry a load of 4000 kN. Compute the settlement of the pile group for the designed load.    Load in kN 0 500 1000 1500 2000 2500 Settlement in mm 0 8.5 16.5 25.5 38.0    60.0 2.) Design a retaining wall for a 8 m sandy soil backfill with unit weight as 17.5...
A 10 m long 300mm diameter cfa concrete pile is to be used as a tension...
A 10 m long 300mm diameter cfa concrete pile is to be used as a tension pile. The soil profile consists of 15m of firm clay overlying dense sand. Seasonally the ground water level varies between 1m and 2m below the ground surface. The undrained strength of the clay is equal to 80% of the effective vertical stress and its unit weight is 18kN/m^3 . Calculate the maximum tensile capacity of the pile.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT