Question

A saturated clay sample has a specific gravity of 2.72, an initial height of 2 cm,...

A saturated clay sample has a specific gravity of 2.72, an initial height of 2 cm, a cross-section area of 30 cm2. After a consolidation test, its mass becomes 109.44g, and the mass after oven-drying is 88.44g. What is the change of its void ratio after the consolidation test compared with that before the test?

Homework Answers

Answer #1

please give a like

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
During a consolidation test, a sample of fully saturated clay 3 cm thick is consolidated under...
During a consolidation test, a sample of fully saturated clay 3 cm thick is consolidated under a pressure increment of 200 kN/m2 . When equilibrium is reached, the sample thickness is reduced to 2.60 cm. The pressure is then removed and the sample is allowed to expand and absorb water. The final thickness is observed as 2.8 cm and the final moisture content is determined as 24.9%. If the specific gravity of the soil solids is 2.70, find the void...
In order to determine the density of a clay soil, an undisturbed sample was taken in...
In order to determine the density of a clay soil, an undisturbed sample was taken in a sampling tube of volume 2 litres. The following data were obtained: •     Mass of tube (empty) = 1900g •     Mass of tube and clay sample = 5280g •     Mass of tube and clay sample after drying = 4850g. Calculate the water content, the bulk, and the dry densities (in kg/m3). If the particle specific gravity was 2.75, determine the void ratio and the...
A saturated clay sample weighs Wm 1,526 grams. After oven drying, its weight becomes Ws 1...
A saturated clay sample weighs Wm 1,526 grams. After oven drying, its weight becomes Ws 1 053 grams. If the Ss is 2.70, find e, n, w, gd, gm.
A cylindrical sample of a soil taken from a sampling tube is 6.3 cm diameter and...
A cylindrical sample of a soil taken from a sampling tube is 6.3 cm diameter and 12.5 cm long and has a mass of 683 gm. After oven drying it weighs 495 gm. Assuming that the particles have a specific gravity, Gs=2.70, calculate the water content, bulk density, dry density, void ratio and degree of saturation?
Consider a clay layer that is 1 m thick. The clay has a compression index of...
Consider a clay layer that is 1 m thick. The clay has a compression index of 0.35, a swell index of 0.07, a permeability of 4 x 10-7 cm/sec, a preconsolidation pressure of 172 kPa and a coefficient of consolidation of 2.7 x 10-4 cm2/min. The initial effective stress at the midpoint of the layer is 140 kPa, and the soil has a void ratio of 1.01. The stress is increased to 200 kPa. The soil is drained above and...
Consider a 20 foot thick saturated clay that has a sand layer above it and an...
Consider a 20 foot thick saturated clay that has a sand layer above it and an impermeable rock layer below it. The clay layer has an initial effective stress at its midpoint of 3145 lbs/ft2.    Due to the presence of a large water tank on the surface, the stress is increased by 710 lbs/ft2 at the midpoint of the clay layer. How much total settlement from primary consolidation is expected? Provide your answer in inches. Soil properties: Compression index = .324,...
The weight of a chunk of moist soil sample is 3.84lb. The volume of the soil...
The weight of a chunk of moist soil sample is 3.84lb. The volume of the soil measured before drying is 0.03ft3. After the sample is dried in an oven, its weight is 3.53lb. The specific Gravity of solids is 2.68. Calculate Water/Moisture content. Calculate Unit weight of moist soil. Calculate Void Ratio. Calculate Porosity. Calculate Degree of Saturation.  
A glass container with pervious bottom containing fine sand in loose state (void ratio = 0.8)...
A glass container with pervious bottom containing fine sand in loose state (void ratio = 0.8) is subjected to hydrostatic pressure underneath until quick condition occurs in the sand. If the specific gravity of sand particles = 2.65, area of cross section of sand sample = 10 cm2 and height of sample 10 cm. Compute the seepage force acting from below (N). Compute the head of water required to cause quicksand condition (cm).
An embankment will be filled at a site. Before filling the embankment, a soil specimen with...
An embankment will be filled at a site. Before filling the embankment, a soil specimen with a height of 20mm is sampled from the middle of a normally consolidated clay which has a thickness of 4 m. A consolidation test reveals that the soil has a pre-consolidation pressure of 120 kPa, compression index Cc = 0.16, initial void ratio of 0.85. (1) If the settlement of the clay layer is 38.6 mm due to the extra loading from the embankment,...
QUESTION 1: The internal and external diameter of a circular steel tank are 30 cm and...
QUESTION 1: The internal and external diameter of a circular steel tank are 30 cm and 32 cm, respectively, and its total height is 60 cm. A natural moist (wet) soil sample is compacted in the tank up to a 50 cm height. In its natural moist state, the soil sample has the total mass of 70000 g before the water content determination. The specific gravity, Gs of the soil is given as 2.7. The values obtained for the determination...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT