Question

Sleepy Hollow has an existing horizontal-flow sedimentation tank with an overflow rate of 17 m 3...

Sleepy Hollow has an existing horizontal-flow sedimentation tank with an overflow rate of 17 m 3 /d · m 2 . What percentage removal should be expected for each of the following particle settling velocities in an ideal sedimentation tank: 0.1 mm/s, 0.2 mm/s, and 1 mm/s??

Homework Answers

Answer #1

Overflow rate is given as

Particles having settling velocity greater than overflow rate will be 100 % removed while other's having settling velocity less than overflow rate will be removed in the proportion of settling velocity compared to overflow rate

Percentage of particle removed is given as

= 50.81 %

Percentage of particle removed = 100 %

Percentage of particle removed = 100 %

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Environmental eng. Sedimentation tanks A sedimentation tank has a depth of 3 meters. To ensure 100%...
Environmental eng. Sedimentation tanks A sedimentation tank has a depth of 3 meters. To ensure 100% particle removal given settling velocity 0.4 m/hr, a) what is the minimum hydraulic retention time? b) What is the minimum length of the sedimentation tank given a horizontal velocity 8 m/hr?
A rectangular horizontal-flow sedimentation basin in a conventional water treatment plant has been designed to treat...
A rectangular horizontal-flow sedimentation basin in a conventional water treatment plant has been designed to treat a flow of 50,000 m3 /day. It has a length = 80 m, width = 20 m, and depth = 3.6 m. For this problem, assume temperature = 20 °C (density of water = 103 kg/m3 and viscosity = 10-3 kg/m·s) and laminar flow. a. What is the hydraulic detention time? Does this meet the typical criteria for this type of sedimentation basin? b....
There are two different suspended particles with settling velocities of 0.1 and 0.2 mm/s. The particles...
There are two different suspended particles with settling velocities of 0.1 and 0.2 mm/s. The particles are present at 60:40 ratio with an overflow rate of (15+N*0.2) m/d. What is the overall removal efficiency of the system? N=2
There are two different suspended particles with settling velocities of 0.1 and 0.2 mm/s. The particles...
There are two different suspended particles with settling velocities of 0.1 and 0.2 mm/s. The particles are present at 60:40 ratio with an overflow rate of (15+N*0.2) m/d. What is the overall removal efficiency of the system? N=6
Design high-rate sedimentation tank(s) for a water treatment plant using plate settlers. 1. Design the rectangular...
Design high-rate sedimentation tank(s) for a water treatment plant using plate settlers. 1. Design the rectangular sedimentation tank(s), including launders and sludge collection mechanism. 2. Design the countercurrent plate settlers, including length, angle, and distance between plates (to achieve 100% removal of the target particle described below). 3. Draw a cross-section of the sedimentation tank with dimensions, indicating the concrete walls, main pipes, launders, plate settlers. 4. Quantify/discuss the improvement(s) that may result from installing the plate settlers. Inputs: Design...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT