Question

An open cylindrical tank 1.20 m. in diameter and 1.80 m. deep is filled with water...

An open cylindrical tank 1.20 m. in diameter and 1.80 m. deep is filled with water and rotated about its vertical axis at 60 rpm
If the container was suddenly stopped after rotating at 60 rpm, what will be the water level (in meters) in the tank?

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A closed cylindrical tank 75 cm in diameter and 1.80 meters high is filled with oil...
A closed cylindrical tank 75 cm in diameter and 1.80 meters high is filled with oil (s = 0.80) such that the top cover is under a pressure of 24 kPa. When rotated about its vertical axis at the rate of 240 rpm, determine the force on: a. The top cover. b. The bottom. c. Find the maximum pressure
An open cylindrical tank with diameter of 3 ft is filled with a liquid to 1...
An open cylindrical tank with diameter of 3 ft is filled with a liquid to 1 ft depth when the tank is stationary. The tank is rotated about its centerline, causing the water level to drop in the center and rise towards the walls of the tank. Calculate a.the angular velocity in rpm at which the tank bottom will first be exposed andb.the maximum water height in ft in the tank at this velocity.
An opaque cylindrical tank with an open top has a diameter of 4.00 m and is...
An opaque cylindrical tank with an open top has a diameter of 4.00 m and is completely filled with water. When the afternoon Sun reaches an angle of 26.5° above the horizon, sunlight ceases to illuminate any part of the bottom of the tank. How deep is the tank?
A cylindrical tank with a large diameter is filled with water to a depth D =...
A cylindrical tank with a large diameter is filled with water to a depth D = 0.405 m. A hole of cross-sectional area A = 5.62 cm^2 in the bottom of the tank allows water to drain out. (a) What is the rate at which water flows out, in cubic meters per second? (b) At what distance below the bottom of the tank is the cross-sectional area of the stream equal to one-half the area of the hole?
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 2.20 m contains water to a depth of 0.900 m . A worker accidently pokes a circular hole with diameter 0.0180 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Part A Just after the hole is made, what is the...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 1.40 m contains water to a depth of 0.800 m . A worker accidently pokes a circular hole with diameter 0.0140 m in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity. Questions 1. How much time does it take for all the...
A closed and elevated vertical cylindrical tank with diameter 80 cm contains water to a depth...
A closed and elevated vertical cylindrical tank with diameter 80 cm contains water to a depth of 0.900 m . A worker opens a circular hole with diameter 12 cm in the bottom of the tank. As the water drains from the tank, compressed air above the water in the tank maintains a gauge pressure of 5.00×103Pa at the surface of the water. Ignore any effects of viscosity ( ½w = 1000 kg=m3 ). a) (12 points) Just after the...
A large storage tank, open to the atmosphere at the top and filled with water, develops...
A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole in its side at a point 14.0 m below the water level. If the rate of flow from the leak is 2.20 ✕ 10−3 m3/min, determine the following. (a) Determine the speed at which the water leaves the hole. m/s (b) Determine the diameter of the hole. mm
a) A hemispherical tank with a radius of 18 meters is filled from an inflow pipe...
a) A hemispherical tank with a radius of 18 meters is filled from an inflow pipe at a rate of 8 cubic meters per minute. The depth of the water in the tank is changing at a rate of about 0.001 meters per minute. What is the rate of change of the exposed surface area of the water when the water is 9 meters​ deep? b) A swimming pool is 50 m long and 20 m wide. Its depth decreases...
A conical tank of diameter 6 m and height 10 m is filled with water. Compute...
A conical tank of diameter 6 m and height 10 m is filled with water. Compute for the work needed to pump all the water 2 m above the tank. The water has a density of 1000 kg per cubic meter.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT