Question

minor losses for a contraction of a 6 in pipe flowing into a connecting 4 in...

minor losses for a contraction of a 6 in pipe flowing into a connecting 4 in pipe

given flow rate = 0.58
KL = 0.5
Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
For pipe flow experiment in fluid mechanics How severe are minor lossess compared to major losses?...
For pipe flow experiment in fluid mechanics How severe are minor lossess compared to major losses? Is pipe bend or pipe angle preferred as a fitting? Why?
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a...
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a diameter of 1.7 meters and a pressure of 500 kPa. If the pipe constricts to a diameter of 0.5 meters, what is the pressure in the constricted pipe section. (Assume the oil flow rate is 65 m3/min and oil density is 900 kg/m3) 49,432.419 kPa 13.096115 kPa 486.403885 kPa 513.801133 kPa 2. Oil is flowing through a horizontal pipe expansion. In the small section,...
A concrete pipe on a 1% slope is flowing 1/3 full. The pipe diameter is 36"....
A concrete pipe on a 1% slope is flowing 1/3 full. The pipe diameter is 36". What is the flow rate?
6) Air at 288 K and 275 kPa abs enters a pipe and is flowing in...
6) Air at 288 K and 275 kPa abs enters a pipe and is flowing in isothermal compressible flow in a commercial pipe having an ID of 0.080 m. The length of the pipe is 60 m. The mass velocity at the entrance to the pipe is 165.5 kg/m2 · s. Assume 29 for the mol ecular weight of air. Calculate the pressure at the exit.
Two interconnected reservoirs have surface areas of 3000 and 1000m^2, respectively. The connecting pipe has a...
Two interconnected reservoirs have surface areas of 3000 and 1000m^2, respectively. The connecting pipe has a diameter of 0.3m, a length of 10,000m and a Darcy Weisbach coefficient f= 0.025. The initial difference in water surface elevation between the two reservoirs was 120m. Determine the time required for the difference to drop (1)110m, (2) 100m, and (3) 90m. Ignore minor losses.
A liquid is flowing through a horizontal pipe whose radius is 0.00752 m. The pipe bends...
A liquid is flowing through a horizontal pipe whose radius is 0.00752 m. The pipe bends straight upward through a height of 4.40 m and joins another horizontal pipe whose radius is 0.0487 m. What volume flow rate will keep the pressures in the two horizontal pipes the same?
A liquid is flowing through a horizontal pipe whose radius is 0.0323 m. The pipe bends...
A liquid is flowing through a horizontal pipe whose radius is 0.0323 m. The pipe bends straight upward through a height of 13.0 m and joins another horizontal pipe whose radius is 0.0799 m. What volume flow rate will keep the pressures in the two horizontal pipes the same?
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a...
Oil is flowing through a horizontal pipe constriction. In the large section, the pipe has a diameter of 1.9 meters and a pressure of 900 kPa. If the pipe constricts to a diameter of 0.4 meters, what is the pressure in the constricted pipe section. (Assume the oil flow rate is 65 m3/min and oil density is 900 kg/m3) 933.509601 kPa 121,028.169 kPa 32.478208 kPa 866.621792 kPa
Water is flowing into a factory in a horizontal pipe with a radius of 0.0183 m...
Water is flowing into a factory in a horizontal pipe with a radius of 0.0183 m at ground level. This pipe is then connected to another horizontal pipe with a radius of 0.0300 m on a floor of the factory that is 11.6 m higher. The connection is made with a vertical section of pipe and an expansion joint. Determine the volume flow rate that will keep the pressure in the two horizontal pipes the same.
Water is flowing at the rate of 1.676 m/s in a 3.068 inches’ diameter horizontal pipe...
Water is flowing at the rate of 1.676 m/s in a 3.068 inches’ diameter horizontal pipe at a pressure p1 of 68.9 kPa. It then passes to a pipe having an inside diameter of 2.067 inch. The density of the water is 998 kg/m3 . a) Calculate the new pressure p2 in the 2.067inch pipe. Assume no friction losses b) If the piping is vertical and the flow is upward, calculate the new pressure p2. The pressure tap for p2...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT