Question

If you have 100 acres of farmland that is relatively flat and needed a pipe for...

If you have 100 acres of farmland that is relatively flat and needed a pipe for it to drain into, what size pipe (diameter) would you need? Would you use a circular pipe or square? What is the difference?

the pipe would be a drain, no pavement.

Homework Answers

Answer #1

Solution -

The size of pipes used in farm land varies from 8 inch to 24 inch in diameter. The selection of size depends on other factors too apart from the area of the land, like soil characteristics, rainfall, topography etc. In general we will choose an intermediate size of pipe which is neither too big nor too small.

A circular pipe is more efficient and more widely available than a square pipe so we will use a circular pipe for drainage.

Circular pipes are easily available in vary types and sizes like perforated, plain etc and they are easier to lay and work with. Also, the resistance offered in circular pipes will be less increasing it's efficiency.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
3. This problem looks at problem 2 from another angle. Again, there are 100 acres in...
3. This problem looks at problem 2 from another angle. Again, there are 100 acres in a jurisdiction, depicted below. The land can be used as subdivided residential land, or for farming. The value of land in each use is as follows. Residential Development: 1,000 – 10D Farming: 250 The notation D indicates developed acres and the notation F indicates farmed acres. Farm land provides environmental benefits that are homogenous across the landscape, and equal to 50 per acre that...
I have a square hollow sectioned pillar that is 100mmx100mm by 8mm thick, and want to...
I have a square hollow sectioned pillar that is 100mmx100mm by 8mm thick, and want to replace it with a circular solid secioned pillar. The material is carbon steel. What would be the smallest diameter you are able to use?
You are the manager of a medium-sized farm with 100 acres of workable land. You can...
You are the manager of a medium-sized farm with 100 acres of workable land. You can farm the land yourself, rent the land using a triple net lease to another farmer for $2,000 per acre, or sell the land to a developer for $40,000 per acre. You have an investment opportunity that pays a return of 6 percent a year. What is your opportunity cost for a year if you decide to farm the land yourself?
1.Determine how deep you would have to drill a hole if you needed to use a...
1.Determine how deep you would have to drill a hole if you needed to use a plug tap to form 15 complete threads for a 0.875 – 16 thread. Explain your decision. How deep would the hole need to be for a bottoming tap? Explain your decision. 2. Describe the thread specification of ¾-16 UNF – LH 0.5625 3. Part A- For a 7/16” fine threaded hex head, 7” long bolt, specify: Nominal Size Tap Drill Dia Minor Dia Major...
You have a nominal 3.5-inch diameter tube steel pipe, 18 feet high that is embedded into...
You have a nominal 3.5-inch diameter tube steel pipe, 18 feet high that is embedded into a concrete foundation.  Neglecting the weight of the column, answer the questions below: What is the maximum vertical load this pipe can support/critical load (lb)? If a vertical load of 2,500 lbs and a horizontal force of 150 lbs are applied at the top of the column, what are the maximum combined tensile and compressive stresses (psi) where the column meets its foundation?  Are they allowable?
You are interested in analyzing the flow of crude oil (ρ=0.87g/cm3) through an inclined pipe of...
You are interested in analyzing the flow of crude oil (ρ=0.87g/cm3) through an inclined pipe of varying cross section, where the pressure at Ⓐ is the same as that at Ⓑ. The fluid velocity at location Ⓐ is 5m/s and there are no frictional losses. What is the fluid velocity at location Ⓑ? What is the relationship between the pipe diameters at locations Ⓐ and Ⓑ?   Consider the earlier example, but now we would like to move the flow against...
You have a steel cable 100 m long, that you want to use for a zipline....
You have a steel cable 100 m long, that you want to use for a zipline. You set it up in the middle of summer when the temperature is 40◦C. You install it to be completely taut between its endpoints. If the temperature outside can drop to -10◦C during the winter, how much extra force do the joints holding the ends of the zipline have to be able to withstand due to the temperature changes (other than a normal load...
A flocculation basin must be drained with a drain line of how big in diameter? Can...
A flocculation basin must be drained with a drain line of how big in diameter? Can you alone buy and install a solids contact unit for water treatment use for your town? Where should a head loss sensor be located for a sand filter? What is the freeboard requirement for a slow sand filter? What exact specifications would you need to tell your supplier for your sand for a rapid sand filter? IF you are going to handle your residuals...
Assume you have a gathering of 2,000 people. a) Can you assure 100 % that at...
Assume you have a gathering of 2,000 people. a) Can you assure 100 % that at least two people will celebrate their birthday on the same day of any given month? b) would it make any difference if the year you are considering is a leap year?
If you illuminated a 100 mm focal length lens with a plane wave of 550 nm...
If you illuminated a 100 mm focal length lens with a plane wave of 550 nm wavelength through a square aperture at the lens of size 1 cm x 1 cm, what size would the central bright region be of the pattern in the back focal plane of the lens (one focal length behind the lens)?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT