Question

An orifice is to be placed in the side of tank at such an elevation that...

An orifice is to be placed in the side of tank at such an elevation that the jet will attain a maximum horizontal distance from the tank at the level of its base. If the depth of the liquid in the tank is maintained at 1.5 m; what is the proper distance from the orifice to the free surface ? (hydraulics)

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

Request: If you still found issues with the solution , kindly comment ! If you like the solution kindly rate upvote ! Thank You !

Note : D=Depth of liquid = 1.5m in given problem

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A large water storage tank is open at the top and the side walls are vertical....
A large water storage tank is open at the top and the side walls are vertical. The water in the tank has depth H. A small hole appears in one of the tanks at a height h above the base. (a) At what distance R from the foot of the wall does the emerging stream strikes the horizontal ground. (b) At what height h above the base is the hole if the water reaches its greatest distance from the base...
A circular plate of 0.61 m diameter is situated in the vertical side of a water...
A circular plate of 0.61 m diameter is situated in the vertical side of a water tank with its centre1.22 m below the level of the free surface. If the plate is hinged about the horizontal diameter, what force must be applied at the top point to just hold it still? To what depth must the hinge axis be lowered to reduce the closing force to zero?
A 10kg box and a 30kg box are placed side by side on a frictionless horizontal...
A 10kg box and a 30kg box are placed side by side on a frictionless horizontal surface. An ideal massless spring with a spring constant of 1920N/m is compressed by a distance of 50cm and placed tightly between the two boxes as shown in the figure. The spring and boxes are then released. Find the speeds of the two boxes after the spring has been released.
A 4 m-wide tank with height of 1.8 m filled with water is pulled with a...
A 4 m-wide tank with height of 1.8 m filled with water is pulled with a cable inclined at 30o to the horizontal. The constant acceleration value in the cable direction is 4 m/s². The water depth is measured as 1.5 m before the motion starts.  Determine the angle between the water surface and the horizontal.  Compute the maximum and minimum pressure values on the bottom of the tank.  How many volume of water are spilled?
A 4 m-wide tank with height of 1.8 m filled with water is pulled with a...
A 4 m-wide tank with height of 1.8 m filled with water is pulled with a cable inclined at 30o to the horizontal. The constant acceleration value in the cable direction is 4 m/s². The water depth is measured as 1.5 m before the motion starts.  Determine the angle between the water surface and the horizontal.  Compute the maximum and minimum pressure values on the bottom of the tank.  How many volume of water are spilled?
A cannonball is launched from level ground at an angle of elevation of 55 degrees and...
A cannonball is launched from level ground at an angle of elevation of 55 degrees and observe to impact level ground downrange at a distance of 432 m. The same cannon is then used to launch a cannonball from level ground at an angle of elevation of 38 degrees into the side of a cliff and the cannonball is observed to strike the cliff 28.5 m above level ground. A) How far is the base of the cliff from the...
The tank is to be placed on a hill that is 1 km high above the...
The tank is to be placed on a hill that is 1 km high above the ground. The enemy’s base is located at a horizontal distance of 10 km away and it is in a valley 0.5 km below the ground. Air resistance is neglected. Gravitational acceleration is constant and equal to 9.8?/?2 downwards. a) If the bomb is to be fired perfectly horizontally, what should the launching speed of the bomb be in order to hit the target? b)...
A wood cube 0.26 m on each side has a density of 730 kg/m3 and floats...
A wood cube 0.26 m on each side has a density of 730 kg/m3 and floats levelly in water. What is the distance from the top of the wood to the water surface?​ 7.0 x 10^-2m What mass has to be placed on top of the wood so that its top is just at the water level?
1. At the shark tank of an aquarium, a square window has sides of 0.9 m....
1. At the shark tank of an aquarium, a square window has sides of 0.9 m. The absolute pressure inside the tank is 1.5 atmospheres. How much force is needed to hold the window in place? 2. At the aquarium, a shark dives underwater to a depth of 6.6 m. What is the gage pressure at this depth? 3. The heating bulb in an Easy-bake oven has an emissivity of 0.5, a surface area of 6 cm2, and radiates 350...
27.) A tank with upright sides contains 0.9 m of mercury and 5 m of water....
27.) A tank with upright sides contains 0.9 m of mercury and 5 m of water. Find the total force on the square from one side, whose area is 0.6 x 0.6, half of this area is below the surface of mercury. The sides of the square are vertical and horizontal. 23.) Oil with a relative density of 0.800 presses the surface of the upright triangle, the peak of which is on the surface of the oil. The triangle is...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT