Question

The NPSHR for a pump is given by the pump manufacturer as 7.2 m. This pump...

The NPSHR for a pump is given by the pump manufacturer as 7.2 m. This pump is being used to pump water from a reservoir at a rate of 300 L/sec. Water temperature is 15 0C and 300C in winter and summer, respectively. Assume total head loss in the suction pipe is 1.5 m. Determine whether or not the pump is safe from cavitation in a) winter b) summer

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

Hope this helps

Please feel free to comment on any further queries

All the best :)

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Water (25 oC) is in an open tank at atmospheric pressure and the pump is 4.9...
Water (25 oC) is in an open tank at atmospheric pressure and the pump is 4.9 m below the open level. The friction head loss in the pipe is 1.5 m. Draw a diagram and calculate the Net Positive Suction Head.
A pump is used to deliver water from a large reservoir to another large reservoir that...
A pump is used to deliver water from a large reservoir to another large reservoir that is 20 m higher. The inlet of the pipe is submerged in the one reservoir and the exit is just above the surface of the other reservoir. If the friction head loss in the 200-mm-diameter, 4-km-long pipeline is 2.5 m for every 500 m of pipe length, determine the required power output of the pump so the flow is 0.6 m3/s.
A single acting reciprocating pump has a piston of 200mm diameter and a stroke of 320...
A single acting reciprocating pump has a piston of 200mm diameter and a stroke of 320 mm and runs at 15 rpm. The level of the water in the sump is 5m below the center line of the pump and the storage reservoir is 25m above the center line of the pump. The suction and delivery pipes are 10m and 26m long and are 100mm and 125mm in diameter respectively. Assume vapor pressure of water as 2.1m (absolute), friction factor...
City water will be cooled in a heat exchanger by sea water entering at 15°C. The...
City water will be cooled in a heat exchanger by sea water entering at 15°C. The outlet temperature of the sea water is 20°C. City water will be recirculated to reduce water consumption. The suction line of the pump has an inner diameter of 154 mm, is 22 m long, and has two 90° bends and a hinged check valve. The pipe from the pump to the heat exchanger has an inner diameter of 127 mm, is 140 m long,...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of...
1) A nozzle is a device for increasing the velocity of a steadily flowing stream of fluid. At the inlet to a certain nozzle the enthalpy of the fluid is 3025 kJ/kg and the velocity is 60 m/s. At the exit from the nozzle the enthalpy is 2790 kJ/kg. The nozzle is horizontal and there is negligible heat loss from it. (i) Find the velocity at the nozzle exit. (ii) If the inlet area is 0.1 m2 and specific volume...
A grey body is one whose absorptivity 1. does not vary with temperature and wavelength of...
A grey body is one whose absorptivity 1. does not vary with temperature and wavelength of the incident ray 2. is equal to its emissivity 3. varies with temperature 4. varies with wavelength of the incident ray A liquid is in equilibrium with its vapor at its boiling point. On an average, the molecules in the liquid and gaseous phases have equal 1. potential energy. 2. kinetic energy. 3.temperature. 4. intermolecular forces of attraction. A liquid of density 1000 kg/m3...
What role could the governance of ethics have played if it had been in existence in...
What role could the governance of ethics have played if it had been in existence in the organization? Assess the leadership of Enron from an ethical perspective. THE FALL OF ENRON: A STAKEHOLDER FAILURE Once upon a time, there was a gleaming headquarters office tower in Houston, with a giant tilted "£"' in front, slowly revolving in the Texas sun. The Enron Corporation, which once ranked among the top Fortune 500 companies, collapsed in 2001 under a mountain of debt...
Discuss ethical issues that can be identified in this case and the mode of managing ethics...
Discuss ethical issues that can be identified in this case and the mode of managing ethics Enron finds itself in this case. How would you describe the ethical culture and levels of trust at Enron? Provide reasons for your assessment. THE FALL OF ENRON: A STAKEHOLDER FAILURE Once upon a time, there was a gleaming headquarters office tower in Houston, with a giant tilted "£"' in front, slowly revolving in the Texas sun. The Enron Corporation, which once ranked among...
Discuss how the respective organizations’ relations with stakeholders could have potentially been affected by the events...
Discuss how the respective organizations’ relations with stakeholders could have potentially been affected by the events that took place at Enron and how the situation could have been dealt with differently to prevent further damage? THE FALL OF ENRON: A STAKEHOLDER FAILURE Once upon a time, there was a gleaming headquarters office tower in Houston, with a giant tilted "£"' in front, slowly revolving in the Texas sun. The Enron Corporation, which once ranked among the top Fortune 500 companies,...
In February 2012, the Pepsi Next product was launched into the US market. This case study...
In February 2012, the Pepsi Next product was launched into the US market. This case study provides students with an interesting insight into PepsiCo’s new product process and some of the challenging decisions that they faced along the way. Pepsi Next Case Study Introduction Pepsi Next was launched by PepsiCo into the US market in February 2012, and has since been rolled out to various international markets (for instance, it was launched in Australia in September 2012). The new product...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT