Question

A six-lane freeway is being designed for a location in rolling terrain. The expected free- flow...

A six-lane freeway is being designed for a location in rolling terrain. The expected free- flow speed is 65 mph. Lane widths will be 12 ft and right shoulder widths will be 6 ft. During the peak hour, it is expected there will be a directional peak- hour volume of 2700 vehicles with 12% heavy vehicles in the traffic stream. The PHF is expected to be 0.90. Determine level of service.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes...
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes with a 4-ft right-side shoulder. The total ramp density is 1.5 ramps per mile. The directional peak-hour traffic volume is 5400 vehicles with 11% heavy vehicles. The peak-hour factor is 0.95. It has been decided that heavy vehicles will be banned from the freeway during the peak hour. What will the freeway’s density and level of service ben before and after the ban? (Assume...
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes...
An eight-lane freeway (four lanes in each direction) is on rolling terrain and has 11-ft lanes with a 4- ft right-side shoulder. The total ramp density is 1.5 ramps per mile. The directional peak-hour traffic volume is 5400 vehicles with 11% heavy vehicles. The peak 15-minute volume is 1421 vehicles. What are the freeway’s density and level of service
An urban circumferential freeway is to be designed on the basis of the following information: design...
An urban circumferential freeway is to be designed on the basis of the following information: design year average annual daily traffic, AADT = 75,000 veh/day; the estimate of the percent of traffic occurring during the peak-hour is 9%; the percent of peak-hour traffic in the heavier direction is estimated to be 55%. The traffic mixture is expected to be similar to the current mixture of 7% trucks, 3% buses and no recreational vehicles. The PHF is estimated to be 0.9....
A six-lane multilane highway (three lanes in each direction) has a peak-hour factor of 0.90, 11-ft...
A six-lane multilane highway (three lanes in each direction) has a peak-hour factor of 0.90, 11-ft lanes with a 4-ft right side shoulder, and a two-way left-turn lane in the median. The directional peak-hour traffic flow is 4000 vehicles, and the traffic stream has 5% single-unit trucks and 5% tractor-trailers. What will the level of service of this highway be on a 2.5% upgrade that is 1.5 miles long if the speed limit is 55 mph and there are 15...
A four-lane freeway (two lanes in each direction) in rolling terrain has a peak 15-min flow...
A four-lane freeway (two lanes in each direction) in rolling terrain has a peak 15-min flow rate of 1800 veh/h during the peak hour. The traffic stream contains 6% trucks, 3% buses, and 5% recreational vehicles. What is the analysis flow rate (i.e., the peak 15-min demand flow rate under equivalent base conditions in pc/h/ln)?
A freeway segment has the following characteristics: Free flow speed of 65 mph; 3 lanes per...
A freeway segment has the following characteristics: Free flow speed of 65 mph; 3 lanes per direction; Located in rolling terrain; The traffic stream vehicle composition includes 12% trucks, 3% buses, and 85% passenger cars; Directional peak-hour volume of 4080 vehicles, with 1200 vehicles arriving in the highest 15-minute flow-rate period. Given these characteristics, calculate the analysis flow rate and determine the Level of Service (LOS) for the given peak hour conditions (write the letter corresponding to the LOS in...
Given the following information of a divided multilane highway section located in rolling terrain. 2 lanes...
Given the following information of a divided multilane highway section located in rolling terrain. 2 lanes per direction Posted speed limit = 55 mi/h 2 access points per mile Lane widths = 11 feet Shoulder width (right side) = 5 feet Shoulder width (left side) = 3 feet PHF =0.80 Directional peak hour volume =2000 vehicles with 7% single-unit trucks and 3 % tractor-trailer trucks. Determine the level of service.
9) An existing rural freeway in level terrain is to be analyzed to determine LOS using...
9) An existing rural freeway in level terrain is to be analyzed to determine LOS using the following information: number of lanes in each direction equals 2, peak hour volume of 2140 veh/h (in the peak direction), 15% trucks, 2% recreational vehicles, PHF = 0.90, lane width = 12 ft, lateral clearance = 10 ft, average interchange spacing is 3 mi.
A six- lane freeway (three lanes in each direction) in a scenic area has a measured...
A six- lane freeway (three lanes in each direction) in a scenic area has a measured free- flow speed of 55 mi/ h. The peak- hour factor is 0.80, and there are 7% SUTs and 3% TTs in the traffic stream. One upgrade is 4.5% and 1.5 mi long. Free-flow speed is 70 mph. If the peak- hour traffic volume is 3900 vehicles, determine level of service?
A long segment of the suburban freeway is to be designed on level terrain. The level...
A long segment of the suburban freeway is to be designed on level terrain. The level segment, however, is followed by a 4.5% grade, 2.0 miles in length. If the DDHV is 2,500 veh/h with 15% trucks (standard mix), how many lanes will be needed on the (a) upgrade, (b) downgrade, (c) level terrain segment to provide for the level of service C? Lane widths and lateral clearances may be assumed to be 12 ft and 6 ft, respectively. Ramp...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT