Question

W300x0.51 steel section is used in a 4m cantilever span. Compute the maximum deflection due to...

W300x0.51 steel section is used in a 4m cantilever span. Compute the maximum deflection due to concentrated load of 289 kN at the midspan. If the allowable deflection is 1/360 of the span check whether the beam meets the deflection requirements or not (15 points)

Homework Answers

Answer #1

ANSWER:-----------

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
W 18X60 steel beam has 10 ft simple span. The beam carries a uniform load of...
W 18X60 steel beam has 10 ft simple span. The beam carries a uniform load of 4 kips/ft including its weight. The allowable deflection is 1/360 of the span length. Determine whether the beam is satisfactory for deflection.
A 356 x 171 US45 steel beam is simply supported at the ends of a span...
A 356 x 171 US45 steel beam is simply supported at the ends of a span of 5.5 m. The beam carries a safe inclusive UDL of 12kN/m and a point load of 75 kN at mid-span. Calculate the maximum deflection due to this load. Let: E = 205 000 N/mm2 I = 12070 cm4 deflection δPL = PL/48EI deflection δudL = 5wL3/384EI
WITH COMPLETE SOLUTION A welded steel girder having the cross section of two fabricated 280 mm...
WITH COMPLETE SOLUTION A welded steel girder having the cross section of two fabricated 280 mm x 25 mm flange and a 600 mm x 15 mm web plate. The plates are joined by four fillet welds that run continuously for the length of the 6 m span girder. Each weld has an allowable load of 330 kN/m. 1.Determine the maximum allowable shear force V for the girder in kN. 2. Calculate the maximum bending stress of the girder if...
A grade 50 W21 x 62 section is used for a simple span of 20 feet....
A grade 50 W21 x 62 section is used for a simple span of 20 feet. The only dead load is the weight of the beam. The beam is fully laterally braced. a) what is the largest service concentrated load that can be placed at the center of the beam? b) what is the maximum unbraced length?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT