Question

the design flow for a plant, using 4 tricking filters with a plastic media, is 0.5...

the design flow for a plant, using 4 tricking filters with a plastic media, is 0.5 mgd. the filters will be in parallel, the influent bod5 to filters will be 200 mg/l, the required effluent bod 5 will e 25 mg/l, the trickling filter design depth is 25 ft. lab testing conducted at 25c and 40 ft depth found the biodegradability constant to be 0.865/ft 0.5 d ^0.5. find the diameter required for each trickling filters.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A trickling filter plant consists of a primary sedimentation tank, a trickling filter 21 m in...
A trickling filter plant consists of a primary sedimentation tank, a trickling filter 21 m in diameter and 2 m depth, and a secondary sedimentation tank. The primary effluent BOD is 100 mg/L, the plant final effluent is 25 mg/L and the recirculation flow is 0.5 of the wastewater flow entering the plant. The temperature of the water is 15oC. The constants for the random plastic media are n = 0.5 and   k20 = 0.055 min-1. Calculate the hydraulic loading.
A municipal wastewater having a BOD5 of 225 mg/L is to be treated by a two-stage...
A municipal wastewater having a BOD5 of 225 mg/L is to be treated by a two-stage trickling filter. The desired effluent quality is 30 mg/L of BOD5. If both of the filter depths are to be 1.83 m and the recirculation ratio is 2:1, find the required filter diameters if both the two trickling filers have same removal efficiencies. Use NRC equation and the following design assumptions. Design assumptions: o Influent flow = 10,000 m3 /d o Recirculation ratio =...
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5...
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5 is 200 mg/L and the effluent soluble BOD5 is 8 mg/L. The plant is designed to operate with a mean cell (biomass) residence time of 10 days. The yield coefficient is 0.6 mg biomass/mg substrate, and the biomass decay rate is 0.09/day. The reactor is to operate at a biomass concentration of 2500 mg/L. The thickened underflow biomass concentration from the secondary clarifier is...
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a...
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a community of 45,000 people has a flow of 100 gal/person/day and a BOD5 loading of 0.2 lb/person/day. The upstream characteristics of the receiving waters are: stream flow rate = 20 cfs and BOD5 = 2 mg/L The water quality standards require the in-stream BOD5 to be less than 7 mg/L in this stretch of the river. The minimum BOD removal efficiency that the treatment...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process for a town of 40,000 people. The industrial flow contribution to the sewer system is 300,000 gallons per day. Effluent discharge standards require effluent BOD5 and total suspended solids concentration of <10 mg/l. Assume the following design criteria are applicable: Domestic sewage flow = 100 gal/cap/day (including I/I) BOD loading = 0.18 lbs/cap/day TSS loading = 0.20 lbs/cap/day BOD removal in primary = 33%...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT