Question

Water is flowing uniformly in a finished-concrete channel of trapezoidal cross section with a bottom width...

Water is flowing uniformly in a finished-concrete channel of trapezoidal cross section with a bottom width of 0.7 m, trapezoid angle of 50°, and a bottom angle of 0.45°. If the flow depth is measured to be 0.45 m, determine the flow rate of water through the channel. Manning coefficient (n) for finished concrete is 0.012.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
7. A) Find the depth of water flowing through a triangular channel having a bed slope...
7. A) Find the depth of water flowing through a triangular channel having a bed slope of 1 in 3500 and side slope of 1:1, when it carries 1.2 m3/s. Take Manning’s Coefficient N = 0.014 B) For a most economical trapezoidal section of side slope 2h: 5V, bed slope of 1 in 2000 and C = 50. Find the rate of flow if the bottom width of the channel is 5 m.
A concrete, trapezoidal channel with a 5-m bottom width and side slopes of 1:1 (H:V) discharges...
A concrete, trapezoidal channel with a 5-m bottom width and side slopes of 1:1 (H:V) discharges 35 m3/sec. The bottom slope of the channel is 0.004. A dam is placed across the channel and raises the water level to a depth of 3.4 m. determine the channel and flow classification (e.g., M-2, S-1) upstream of the dam and explain your supporting logic. then compute the water surface profile at 50-m intervals until you reach the hydraulic jump. Use a spreadsheet...
a trapezoidal channel to carry 142 m³/minute of water is designed to have a minimum cross-section....
a trapezoidal channel to carry 142 m³/minute of water is designed to have a minimum cross-section. find the bottom width and depth if the bed slope is1 in 1200, the side slope at 45° and chezy's co-efficient =55
Consider the California aqueduct, which is a concrete trapezoidal channel with a bottom width of 40...
Consider the California aqueduct, which is a concrete trapezoidal channel with a bottom width of 40 ft, a longitudinal slope of 0.004% and 1.5H:1V sideslopes (z = 1.5). Assume n = 0.013. The design discharge is 6400 mgd. (use 9900 cfs) The depth of water is 29 ft at point A. The depth of water is 30 ft at point B. (a) What is the normal depth? b) Determine the critical depth. (c) What type of profile exists in the...
A trapezoidal concrete channel (n = 0.015) has side slopes of 2H:1V, a bottom width of...
A trapezoidal concrete channel (n = 0.015) has side slopes of 2H:1V, a bottom width of 10.0 ft, and a longitudinal slope of 0.005. (a) Compute the discharge rate (in cfs) and velocity (ft/s) when the water depth is 3.0 ft. (b) Compute normal depth and critical depth (in feet) for a discharge rate of 300 cfs.
Calculate the depth of flow in a trapezoidal channel with a bottom width of 3m and...
Calculate the depth of flow in a trapezoidal channel with a bottom width of 3m and whose walls slope 40 degrees with the horizontal. The channel is made of unfinished concrete and is laid on a 0.1% slope. The discharge is 15m^3/s.
How do I calculate the depth of the river if I have a trapezoidal cross section...
How do I calculate the depth of the river if I have a trapezoidal cross section with bottom width b = 10 meters, H:V = 2:1, Q = 655 m3/2, total height of trapezoidal is 8 meters, manning roughness coefficient: n = 0,025 on all sides, and river bed slope    i = 0.0007
A trapezoidal channel has a bottom width of 5 m and side slopes m = 2....
A trapezoidal channel has a bottom width of 5 m and side slopes m = 2. If the flow rate is 20 m3/s, what is critical depth?
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of...
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of 3m, 3:1 side slopes (i.e. Z = 3), a longitudinal bed slope of 0.0009 m/m with a Manning’s roughness coefficient of 0.025 (i.e. sand). State the normal flow depth (yn) critical flow depth (yc) and the Froude Number of the flowing water.
Case Study 1 - What is the flow rate? An engineering Channel with top width is...
Case Study 1 - What is the flow rate? An engineering Channel with top width is 20 ft, bottom width is 10 ft, and depth is 5 ft. Channel slope is 1%, and manning N is 0.05. A trapezoid Channel.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT