Question

4 A rectangular footing 8 m x 12 m carries a uniformly distributed load of (900+...

4

A rectangular footing 8 m x 12 m carries a uniformly distributed load of (900+ 10Y) kN/m2. Evaluate the vertical pressure at a point (2+0.5Y) m below the foundation and having x, y coordinates as (-5,-8) with respect to the central axis of the footing.

   y=2

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A stiff footing size 4.5x4.5m carries a total uniformly distributed load of 3250 kN. Find the...
A stiff footing size 4.5x4.5m carries a total uniformly distributed load of 3250 kN. Find the intensity of vertical stress due to the loading at a point located at 4.5m below a corner of the footing. The central area of 3mx3m is loaded at twice the intensity of the remainder.
A simply supported beam is 3 m long. It carries a uniformly distributed load of 6...
A simply supported beam is 3 m long. It carries a uniformly distributed load of 6 kN/m throughout its span and a concentrated load of 15 kN at a point 2 m from the left support. Assuming that the beam has a rectangular shape whose width and depth are 150 mm and 250 mm, respectively. Determine the maximum flexural stress in MPa developed in the beam.
Determine the depth at which a circular footing of (2+0.4Y) m diameter be founded to provide...
Determine the depth at which a circular footing of (2+0.4Y) m diameter be founded to provide a factor of safety of 3, if it has to carry a safe load of (1500+10Y) kN. The foundation soil has a cohesion of 10kN/m2, an angle of internal resistance of (30 +Y)o. The water table is at the ground surface and the unit weight of the soil is 19 kN/m3. Use Terzaghi’s Analysis. y=2
A three hinged semi-circular arch of radius 15 m carries a uniformly distributed load of 10...
A three hinged semi-circular arch of radius 15 m carries a uniformly distributed load of 10 kN/m run of horizontal span. Find horizontal thrust and location and magnitude of maximum bending moment in the arch.
The beam is subjected to a uniformly distributed load w= 12 kN/m. The beam is a...
The beam is subjected to a uniformly distributed load w= 12 kN/m. The beam is a two-span continuous beam. The length of each span is L = 2 m. The beam is made of steel. Young's modulus (E) of steel is 200 GPa. The value of the moment of inertia is 21 * 106 mm4. Use the force method given in Week 6. Determine the reaction at the middle support B. Select one: a. 6.00 kN b. 18.00 kN c....
A wide loaded area carries a net uniformly distributed pressure q = 150 kPa on a...
A wide loaded area carries a net uniformly distributed pressure q = 150 kPa on a soil profile that consists of 3 layers [4 m sand (20 kN/m³) over 2 m clay (18 kN/m³) over 3. m sand]. The water table is at the top of clay layer. The permeability of sand is very large. Cv = 0.50 m2/year; Calpha= 0.05; eo = 1.00. Compute the settlement due to secondary compression after 60 years.
A -2 nC charge is located at x = 1 m, a 4 nC charge is...
A -2 nC charge is located at x = 1 m, a 4 nC charge is located at x = 3 m. Part A - Where along the y-axis is the electric potential, VV, zero? A 300 m long copper wire, of resistivity, ρρ, 1.68 × 10-8 Ω·m, has a cross sectional area, A⃗ A→, of 5.26 ×10-6 m2 and carries a current density, J⃗ J→, of 3.802281 × 106 A/m2. Part B - The power, PP, dissipated in the...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT