Question

a tension test was performed on a steel specimen having an original diameter of 0.503in. and...

a tension test was performed on a steel specimen having an original diameter of 0.503in. and gauge length of 2.00in. using the data listed in the table, plot the stress-strain diagram and determine approximately the modulus elasticity

load(kip elongation(in) load(kip elongation
0 0 13.0 0.0400
2.5 0.009 14.0 0.1400
6.50 0.0025 14.5 0.2500
8.00 0.0040 13.5 0.3500
9.2 0.0075 13.0 0.5700
9.80 0.0098
Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Problem. A cylindrical specimen of a hypothetical metal having a diameter of 7.671 mm and a...
Problem. A cylindrical specimen of a hypothetical metal having a diameter of 7.671 mm and a gauge length of 251.905 mm is pulled in tension. Use the load–elongation characteristics shown in the following table to complete parts (a) through (f). (a) Plot the data as stress (MPa) versus strain (b) Compute the modulus of elasticity in GPa (c) Determine the yield strength at a strain offset of 0.002 (d) Determine the tensile strength of this alloy (e) What is the...
A cylindrical specimen of stainless steel having diameter of 12.8 mm and a guage length of...
A cylindrical specimen of stainless steel having diameter of 12.8 mm and a guage length of 50.88 mm(2.000in.) is pulled in tension. Use the load-elongation characterisitcs shown in the following table. Plot the data as engineering stress vs. engineering strain. Then compute the modulus of elasticity, yeild strength at a strain offset of 0.002, determine the tensile strength of this alloy, approximate ductility in percent elongation and the modulus of resilience. N mm 0 50.8 12700 50.825 25400 50.851 38100...
Q3: Tension test was conducted on a mild steel rod having diameter 1.5 cm and length...
Q3: Tension test was conducted on a mild steel rod having diameter 1.5 cm and length 20 cm. While applying a load of 10 kN, there will be an extension of 0.012 cm on a length of 20 cm. Maximum load carried by the rod was found to be 26 kN and the load beyond which stress is not proportional to strain was observed to be 11 kN. When the specimen breaks, the extension of the rod for 20 cm...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT