Question

When the pipes are connected in series, the total rate of flow is the same as...

When the pipes are connected in series, the total rate of flow

is the same as flowing through each pipe

none of the mentioned

is equal to the reciprocal of the sum of the rate of flow in each pipe

is equal to the sum of the rate of flow in each pipe

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Series/Parallel Circuits: When unequal resistors are connected in series across an ideal battery, the same power...
Series/Parallel Circuits: When unequal resistors are connected in series across an ideal battery, the same power is dissipated in each one. the potential difference across each is the same. the equivalent resistance of the circuit is equal to the average of all the resistances. the current flowing in each is the same. the equivalent resistance of the circuit is less than that of the smallest resistor.
(vi) Water flows full through two horizontal pipes of the same length and the same material....
(vi) Water flows full through two horizontal pipes of the same length and the same material. Both flows are turbulent and Pipe 1 is half the diameter of Pipe 2. If both pipes have the same mean flow speed, which of the following statements is correct regarding the pressure drop that occurs along the pipes? (a) Pipes 1 and 2 have the same pressure drop (b) Pipe 2 has the higher pressure drop (c) Pipe 1 has the higher pressure...
When a pipeline branches into two parallel pipes, we have seen how the flow can divide...
When a pipeline branches into two parallel pipes, we have seen how the flow can divide unevenly, depending upon the lengths and diameters of the two branches. Consider a parallel pipe system made up of two branches. For simplicity, assume that the friction factors are the same in the two branches. Pipe A has a diameter of 1.5 inches. Pipe B has a diameter of 1 inch and a length of 10 feet. So, if the pipes were the same...
Water flows through two horizontal pipes that are connected one after another but located at different...
Water flows through two horizontal pipes that are connected one after another but located at different heights. There are pressure gauges on each of the pipes. The speed of the water through the lower pipe is 5.0 m/s. The two pipes have different diameters. The lower pipe has a diameter of 6 cm and the higher one 4 cm. Assume no viscous losses. a. Draw a diagram of the situation and calculate the speed in the upper pipe. b. What...
Water is flowing into a factory in a horizontal pipe with a radius of 0.0183 m...
Water is flowing into a factory in a horizontal pipe with a radius of 0.0183 m at ground level. This pipe is then connected to another horizontal pipe with a radius of 0.0300 m on a floor of the factory that is 11.6 m higher. The connection is made with a vertical section of pipe and an expansion joint. Determine the volume flow rate that will keep the pressure in the two horizontal pipes the same.
A liquid is flowing through a horizontal pipe whose radius is 0.00752 m. The pipe bends...
A liquid is flowing through a horizontal pipe whose radius is 0.00752 m. The pipe bends straight upward through a height of 4.40 m and joins another horizontal pipe whose radius is 0.0487 m. What volume flow rate will keep the pressures in the two horizontal pipes the same?
A liquid is flowing through a horizontal pipe whose radius is 0.0323 m. The pipe bends...
A liquid is flowing through a horizontal pipe whose radius is 0.0323 m. The pipe bends straight upward through a height of 13.0 m and joins another horizontal pipe whose radius is 0.0799 m. What volume flow rate will keep the pressures in the two horizontal pipes the same?
Water is flowing into a factory in a horizontal pipe with a radius of 0.0163 m...
Water is flowing into a factory in a horizontal pipe with a radius of 0.0163 m at ground level. This pipe is then connected to another horizontal pipe with a radius of 0.0380 m on a floor of the factory that is 11.6 m higher. The connection is made with a vertical section of pipe and an expansion joint. Determine the volume flow rate that will keep the pressure in the two horizontal pipes the same. _________ m3/s
When two capacitors are connected in parallel and connected to a battery, the total energy stored...
When two capacitors are connected in parallel and connected to a battery, the total energy stored is 5 times greater than when they are in series and connected to the same battery. What is the ratio of the two capacitances?
Draw a series connection of 4 resistors with 20, 60, 80 and 120 ohms respectively, connected...
Draw a series connection of 4 resistors with 20, 60, 80 and 120 ohms respectively, connected to a 110 volt source. Solve for the total current flowing in all 4 resistors. Draw a parallel connection of the same resistors connected to the same voltage source in the first part. Solve for the current for each resistor.