Question

: Which method of soil test is preferred as an Engineer to determine the density of...

: Which method of soil test is preferred as an Engineer to determine the density of soil in the construction site? What is the difference in the procedure in doing the soil test for determining the dry density and bulk density of soil?

Homework Answers

Answer #1

To determine density of soil in construction site Core cutter method is generally used

For bulk density, core cutter is inserted in the ground so that soil should enter in the core cutter then the soil mass present in the core cutter should be weigh. Then calculate bulk density by dividing mass of soil by volume of core cutter which is predetermined (generally 1000cm³)

For dry density, we have to dry the soil mass and then weigh. After drying the soil mass in oven weigh it and calculate dry density by dividing dry mass of soil by volume of core cutter.

Than

Please rate the answer.

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
In order to determine the density of a clay soil, an undisturbed sample was taken in...
In order to determine the density of a clay soil, an undisturbed sample was taken in a sampling tube of volume 2 litres. The following data were obtained: •     Mass of tube (empty) = 1900g •     Mass of tube and clay sample = 5280g •     Mass of tube and clay sample after drying = 4850g. Calculate the water content, the bulk, and the dry densities (in kg/m3). If the particle specific gravity was 2.75, determine the void ratio and the...
: In a construction site containing only cohesionless soil deposit, how relative density is determined? Also,...
: In a construction site containing only cohesionless soil deposit, how relative density is determined? Also, suggest a remedial method to improve the density index of that site if the relative density is poor.
A field density test has been run on a soil containing 17% of its weight in...
A field density test has been run on a soil containing 17% of its weight in particles retained on the No. 4 sieve. The dry density of the total sample was 127.2 pcf and the water content was 7%. The water content of the gravel fraction was 2%. The specific gravity of solids was 2.71. 1. Compute the water content of the soil fraction of the fill that passes the No. 4 sieve. 2. Compute the dry density of the...
Q1. Complete the following table, provided for a sandy soil (Gs =2.65). Accordingly, find the dry...
Q1. Complete the following table, provided for a sandy soil (Gs =2.65). Accordingly, find the dry unit weigh of this soil. Mass (t) Vol. (m3) Air 13.46 Water 13.25 Solids 50.00 Total Q2. A soil specimen has a moisture content of 21%, a void ratio of 0.6, and a specific gravity of 2.7. Determine the bulk unit weight of this soil. Q3. If we are dealing with a very soft clay soil in the site, which field test equipment will...
In a 1D compression test, the ring used to hold the soil measured to be 1...
In a 1D compression test, the ring used to hold the soil measured to be 1 inch in height and 2.5 inches in diameter. The moist soil weighed 131.77g and a oven dry weight of 21.5g. Assuming G (gravity factor) is 2.7 Determine: A) initial values of - Water content, Density, unit weight, saturation, void ratio B) Final values of - Density, unit weight, saturation and void ratio
A soil has a field capacity of 23 %, a bulk density of 1.5 g/cm3 and...
A soil has a field capacity of 23 %, a bulk density of 1.5 g/cm3 and a root zone of 60 cm. What is the gross depth of water, which should be applied to obtain application and storage efficiencies of 80 % and 90 % respectively, if the average moisture content in the root zone before irrigation was 18 %.
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with...
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with a volume of 1/30 cubic foot which uses 4 layers to place soil in the mold and compacts each layer using a hammer with a weight of 10 lbs that is dropped 12 inches and uses 20 blows per layer. (2 pts) 2. Using the result from question 1 compare the compaction energy to the Modified Proctor compaction test and the Standard Proctor compaction...
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with...
Compute the compactive effort or compaction energy for a soil sample compacted in a mold with a volume of 1/30 cubic foot which uses 4 layers to place soil in the mold and compacts each layer using a hammer with a weight of 10 lbs that is dropped 12 inches and uses 20 blows per layer. (2 pts) 2. Using the result from question 1 compare the compaction energy to the Modified Proctor compaction test and the Standard Proctor compaction...
a) A Standard Penetration Test (SPT) is conducted to measure the in situ strength of A-7-6...
a) A Standard Penetration Test (SPT) is conducted to measure the in situ strength of A-7-6 subgrade soil. The number of blows required to drive the split spoon sampler into the ground were as follows b) The maximum dry density for a soil obtained in the lab at 11% moisture content is 122.4 pcf If the measured field bulk density was 131.6 pcf at 10% water content, what is the percent compaction achieved for this soil in the field? C)...
1. Compute the compactive effort or compaction energy for a soil sample compacted in a mold...
1. Compute the compactive effort or compaction energy for a soil sample compacted in a mold with a volume of 1/30 cubic foot which uses 4 layers to place soil in the mold and compacts each layer using a hammer with a weight of 10 lbs that is dropped 12 inches and uses 20 blows per layer. (2 pts) 2. Using the result from question 1 compare the compaction energy to the Modified Proctor compaction test and the Standard Proctor...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT