Question

A 25 ft. high wall 12 in. thick is to be poured at a rate of...

A 25 ft. high wall 12 in. thick is to be poured at a rate of 7 ft./hr. at a temperature of 50° F. Assume the that the concrete conforms with the conditions required for the use of the concrete pressure formula.


1. What is the maximum pressure on the concrete?
2. The maximum pressure occurs at what distance down from the top of the wall?
3. The recommended minimum design pressure on concrete forms is?

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A wall has a height of 12 ft. the rate of filling is 4 ft/hr. Concrete...
A wall has a height of 12 ft. the rate of filling is 4 ft/hr. Concrete slump is 4 inches. The temperature of the concrete at placement is 70 F and the concrete will be vibrated internally. a) What is the maximum form pressure in psf? b) If everything is the same as above but the concrete slump is 10 inches and the rate of placement increases to 8 ft/hr., what is the maximum form pressure in psf?
Design forms for 13’-8” high wall to be concreted at the rate of 5 ft per...
Design forms for 13’-8” high wall to be concreted at the rate of 5 ft per hour, internally vibrated. Assume the mix is made with Type I cement, with no pozzolans or admixtures, and that the temperature of concrete at placing is 75°F. The unit weight of concrete is 150 pcf with a slump of 3.75 inches. The forms will be used only once, so short-term loading stresses will apply. Use form grade plywood sheathing 7/8 in. thick in 5×10-ft...
A composite wall 8.5 ft X 10.5 ft is made of 1.5-in.-thick gypsum plaster and 1.62-in.-...
A composite wall 8.5 ft X 10.5 ft is made of 1.5-in.-thick gypsum plaster and 1.62-in.- thick fir. When a temperature difference of 85°F exists across the wall, what thickness of mineral wool insulation must be added to limit heat transfer through the wall to 820 Btu/hr? What is the thermal resistance of the wall?
Given the following design conditions for a Wall form system: Concrete Mix = Type III cement...
Given the following design conditions for a Wall form system: Concrete Mix = Type III cement without retarder, Concrete Unit Weight (w) = 150 pcf Wall height (h) = 10 Feet high, Rate of Pour (R) = 8 Feet per hour, Concrete Temperature (T) = 80 Degrees Fahrenheit, Wall Thickness = 12 inches What is the maximum design pressure on the wall in pounds per square foot (psf)? Please solve with all steps and calculations included.
Consider a vertical wall 3 m high. The soil behind it is a clean loose sand,...
Consider a vertical wall 3 m high. The soil behind it is a clean loose sand, specific weight= 17:6kN/m3 ; phi = 36. The backfill is level. Determine the following: (a) Total force on the wall, at-rest conditions. (b) Location of the resultant. (c) Magnitude of lateral earth pressure at top of wall. (d) Magnitude of lateral earth pressure at base of wall. (e) The force on the wall for the Rankine active condition. (f) The distance the top of...
A 16-storey high building has plan dimensions of 60 x 60 (W=60 ft. and L=60 ft.)....
A 16-storey high building has plan dimensions of 60 x 60 (W=60 ft. and L=60 ft.). The floor height is equal to 12 feet. Under winter design conditions, one side receives a normal wind at a velocity of 15 mph. The neutral axis lies on the 7th floor. Estimate the pressure difference for all the four walls of the 1st and 16th floors considering only the wind and the stack effects. What is the net pressure difference on these floors...
QUESTION 89 A high-rise building that has water tanks on the roof will probably have a...
QUESTION 89 A high-rise building that has water tanks on the roof will probably have a ________ water distribution system for the upper floors. Upfeed Pumped upfeed Downfeed None of the above 1 points    QUESTION 90 Which of the following ratings evaluates the performance of a building "assembly" in a fire? a. Building Construction Type b. Flame Spread rating c. Fire Resistance Rating d. Location in a building 1 points    QUESTION 91 Which of the following statements is...
Design a "bungee jump" apparatus for adults. A bungee jumper falls from a high platform with...
Design a "bungee jump" apparatus for adults. A bungee jumper falls from a high platform with two elastic cords tied to the ankles. The jumper falls freely for a while, with the cords slack. Then the jumper falls an additional distance with the cords increasingly tense. Assume that you have cords that are 12 m long, and that the cords stretch in the jump an additional 19 m for a jumper whose mass is 120 kg, the heaviest adult you...
ch 6 1: It is generally a good idea to gain an understanding of the "size"...
ch 6 1: It is generally a good idea to gain an understanding of the "size" of units. Consider the objects and calculate the kinetic energy of each one. A ladybug weighing 37.3 mg flies by your head at 3.83 km/h . ×10 J A 7.15 kg bowling ball slides (not rolls) down an alley at 17.5 km/h . J A car weighing 1260 kg moves at a speed of 49.5 km/h. 5: The graph shows the ?-directed force ??...
A stone is dropped from the top of a cliff. The splash it makes when striking...
A stone is dropped from the top of a cliff. The splash it makes when striking the water below is heard 3.2 s later. How high is the cliff? 2. The pressure variation is a sound wave is given by Δ P = 0.0035 sin (0.38 π x – 1350 π t) Determine a. the wavelength b. the frequency c. the speed and d. the displacement amplitude of the wave. Assume the density of the medium to be 2.2 x...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT