Question

. A galvanized iron service pipe ( ϵ = 0.15 mm) is required to deliver a...

. A galvanized iron service pipe ( ϵ = 0.15 mm) is required to deliver a flow rate of 0.5 m3/s. If the length of the pipe is 200 m and the head loss is not to exceed 50 m, calculate the minimum pipe diameter that can be used by trial and error. Assume an initial value of 0.025 for f. Please show all work

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A 250 mm diameter of cast iron pipe flows 39.3 L/s of SAE 10 oil along...
A 250 mm diameter of cast iron pipe flows 39.3 L/s of SAE 10 oil along 500 m length. Given: dynamic viscosity, μ and density, ρ of SAE 10 oil are 1.04 x 10-1 Ns/m2 and 917 kg/m3 respectively. By assuming the flow is laminar, determine energy head and pressure loss due to pipe friction using Hagen-Poiseuille equation and friction factor, f.
A pump is used to deliver water from a large reservoir to another large reservoir that...
A pump is used to deliver water from a large reservoir to another large reservoir that is 20 m higher. The inlet of the pipe is submerged in the one reservoir and the exit is just above the surface of the other reservoir. If the friction head loss in the 200-mm-diameter, 4-km-long pipeline is 2.5 m for every 500 m of pipe length, determine the required power output of the pump so the flow is 0.6 m3/s.
A galvanised iron pipe is required to carry water at a discharge of 300 m3/hr and...
A galvanised iron pipe is required to carry water at a discharge of 300 m3/hr and with a permissible head loss of 3.2 m per kilometre. What is the minimum size of the galvanised pipe?
A galvanised iron pipe is required to carry water at a discharge of 250 m3/hr and...
A galvanised iron pipe is required to carry water at a discharge of 250 m3/hr and with a permissible head loss of 3 m per kilometre. What is the smallest pipe size that can be used? Enter the pipe diameter in metres with up to three significant figures.
Water flows in a 350-mm-diameter pipe at the rate of 600 liters per second. The pipe...
Water flows in a 350-mm-diameter pipe at the rate of 600 liters per second. The pipe has a length of 64 m. Compute the head loss: Using Darcy-Weisbach formula with f =0.028. Using Hazen-William’s formula with C1 = 92. Using Manning’s formula with n = 0.012.
A shell and-tube heat exchanger is required for the following service: Hot stream Cold Stream Aromatic...
A shell and-tube heat exchanger is required for the following service: Hot stream Cold Stream Aromatic Stream Cooling Water inlet Temperature (oC) 85 20 outlet Temperature (oC) 40 35 Mass Flowrate x heat Capacity (kW/oC) 85.2 Hot Stream cold stream (Cooling water) Heat Capacity (J/kg K) 2840 4193 Density (kg/m3) 750 999 Viscosity (cP) 0.34 1.016 Thermal conductivity (W/m.K) 0.19 0.594 Fouling Factor (m2.oC/W 0.00018 0.000176 ? The cooling water is allocated to the tube-side of the exchanger. ? It...