Question

A trapezoidal channel (Manning, n = 0.012) is to be designed to carry a discharge of...

A trapezoidal channel (Manning, n = 0.012) is to be designed to carry a discharge of 14 m3/s at a slope of 0.003. The sides slope is to be fixed at 1V: 1.5H. Determine the dimensions of the channel based on the best hydraulic section criteria. Check the adequacy of the design in term of its Froude number.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Design a gravel riprap-lined trapezoidal channel to carry 11.33 m3/s by considering the best hydraulic section...
Design a gravel riprap-lined trapezoidal channel to carry 11.33 m3/s by considering the best hydraulic section with a slope S0 = 0.0016. Solve the problem using the tractive force method from the textbook (Chapter 15.3.2). (Note: you need to find the gravel size so that the design criteria are satisfied).
1. A trapezoidal channel carrying 11.5 m3/s clear water is built with concrete (no erodible) channel...
1. A trapezoidal channel carrying 11.5 m3/s clear water is built with concrete (no erodible) channel having a slope of 0.0016 and n= 0.025. Proportion the section dimensions. Use best hydraulic section approach
3. A trapezoidal channel has a base width b = 8 ft and side slopes 6H:1V....
3. A trapezoidal channel has a base width b = 8 ft and side slopes 6H:1V. The frictional slope is Sf = 0.035 and the Manning roughness coefficient is n = 0.014. Design a channel if channel discharge is = 15.45 m3 /s using Mannings equation. The farmer land is 3.482 acre with a length of 951.43 ft. what is the best length for the grass waterway? Depth of channel, d=? (5).   Top width of the channel=? (3) Freeboard of...
3. a) A trapezoidal open channel is being designed to convey a discharge of 11.0 m3...
3. a) A trapezoidal open channel is being designed to convey a discharge of 11.0 m3 /sec. The channel will be excavated into clay and will have the following properties: side slope with m = 1.5, bottom slope of So = 0.001, Manning’s n = 0.022, and bottom width b = 1.0 m. For these conditions is there a risk of channel erosion? b) The earth-works contractor that will carry out the excavation suggests that the side slope angle can...
Design a trapezoidal concrete lined channel (n = 0.013) to convey 3m3 /sec on a slope...
Design a trapezoidal concrete lined channel (n = 0.013) to convey 3m3 /sec on a slope of 0.0004. Assume the use of a best hydraulic section for the design. Express your answers to the nearest mm.
The discharge in a channel with bottom width 3 m is 12 m3 s–1. If Manning’s...
The discharge in a channel with bottom width 3 m is 12 m3 s–1. If Manning’s n is 0.013 m-1/3 s and the streamwise slope is 1 in 200, find the normal depth if: (a) the channel has vertical sides (i.e. rectangular channel); (b) the channel is trapezoidal with side slopes 2H:1V. (Answer with steps plz)
a trapezoidal channel to carry 142 m³/minute of water is designed to have a minimum cross-section....
a trapezoidal channel to carry 142 m³/minute of water is designed to have a minimum cross-section. find the bottom width and depth if the bed slope is1 in 1200, the side slope at 45° and chezy's co-efficient =55
Design a concrete-lined canal to carry a discharge of 10,000 cfs. The canal has a Manning’s...
Design a concrete-lined canal to carry a discharge of 10,000 cfs. The canal has a Manning’s n = 0.015 and is to be laid on a longitudinal slope of 0.0007. If the canal is designed to have a trapezoidal cross section with a side slope of Z = 1.5 and a bottom width/normal depth ratio of b/yn = 3.0, determine its required bottom width, depth, and free board. What is the Froude number (Fr)? Will the canal have a supercritical...
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of...
A discharge of 4.25 m3 /s occurs within a trapezoidal channel with a base width of 3m, 3:1 side slopes (i.e. Z = 3), a longitudinal bed slope of 0.0009 m/m with a Manning’s roughness coefficient of 0.025 (i.e. sand). State the normal flow depth (yn) critical flow depth (yc) and the Froude Number of the flowing water.
A hydraulic jump is formed in a trapezoidal channel of 2.0-m bed width, 1:1 side slope,...
A hydraulic jump is formed in a trapezoidal channel of 2.0-m bed width, 1:1 side slope, and carrying a discharge of 6.0 m3/s. The initial and final depths of the jump are 0.5m and 2.0m, respectively. Concrete blocks are placed to stabilize the jump. Cf = 0.6. Construct the M-y diagram for the channel section. Find the critical depth.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT