Question

a) Two beam specimens with 15 cm square cross-section and 45 cm span length, made from...

a) Two beam specimens with 15 cm square cross-section and 45 cm span length, made from the same concrete, were tested under 3-point bending and 4point bending. The fracture loads were 20 kN and 25 kN, respectively. Calculate the flexural strength for both cases, in MPa.
b) Estimate the compressive strength of this concrete.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of...
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of 450 mm x 660 mm (b = 450 mm and D = 660 mm). The length of the beam is 5 m. The elastic modulus of the concrete is 32.8 GPa. A uniformly distributed live load of 23 kN/m is acting on the beam. Determine (a) the design bending moment on this beam for strength limit state, (b) modular ratio assuming Es = 200...
A beam of square cross section, 10 x 10 cm and length 5 m has a...
A beam of square cross section, 10 x 10 cm and length 5 m has a Young’s modulus of 200 GPa and density 7800 kg/m3. For a case of simply supported ends determine the first three natural frequencies and correspondent modes shapes.
WITH COMPLETE SOLUTION A welded steel girder having the cross section of two fabricated 280 mm...
WITH COMPLETE SOLUTION A welded steel girder having the cross section of two fabricated 280 mm x 25 mm flange and a 600 mm x 15 mm web plate. The plates are joined by four fillet welds that run continuously for the length of the 6 m span girder. Each weld has an allowable load of 330 kN/m. 1.Determine the maximum allowable shear force V for the girder in kN. 2. Calculate the maximum bending stress of the girder if...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT