Question

A commercial new zinc-coated (galvanized) steel pipe used to transport water hasthe following characteristics:Pressurized flow rate...

A commercial new zinc-coated (galvanized) steel pipe used to transport water hasthe following characteristics:Pressurized flow rate 400l/s. Hydraulic Gradient (HG)0.40%.Provide an estimate of itsinterior diameter andvelocity of flow.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Water flows at a rate of 14.7 gallons per minute in a new horizontal 1.1-in.-diameter galvanized...
Water flows at a rate of 14.7 gallons per minute in a new horizontal 1.1-in.-diameter galvanized iron pipe. Determine the pressure gradient, , along the pipe.
Provide an estimate of the interior diameter and the velocity of flow in a new ductile...
Provide an estimate of the interior diameter and the velocity of flow in a new ductile iron pipe bitumen lined used to transport raw water to a treatment plant. It is estimated that the head loss due to friction in the pipe is 0.35%. The measured pressurized flow rate in the pipe is 250l/s.
Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in...
Water moves through a constricted pipe in steady, ideal flow. At the lower point shown in the figure below, the pressure is P1= 2.00  104 Pa, and the pipe diameter is 5.0 cm. At another point y = 0.40 m higher, the pressure is P2 = 1.25  104 Pa and the pipe diameter is 2.50 cm. A) find the speed of flow in the lower section in m/s B) find the speed of flow in the upper section in m/s C) Find...
A venturi meter is used to measure the flow rate of water at 26.7°C in a...
A venturi meter is used to measure the flow rate of water at 26.7°C in a pipe. The venturi meter having a throat diameter of 38 mm and its coefficient is 0.98. When the water flow rate in the pipe is 72 m'h, the manometer reading is 1.253 m of mercury. The density of mercury is 13600 kg/m'. Calculate the inside diameter of the pipe in mm
An orifice and a mercury manometer are used to accurately determine the flow of water through...
An orifice and a mercury manometer are used to accurately determine the flow of water through a 200mm diameter pipe. The volumetric flow rate through the pipe is 0.9m^3/s. Determine the diameter of the orifice that will cause a reading of 150mm between the mercury levels. Take Cd = 0.67
Water is flowing at the rate of 1.676 m/s in a 3.068 inches’ diameter horizontal pipe...
Water is flowing at the rate of 1.676 m/s in a 3.068 inches’ diameter horizontal pipe at a pressure p1 of 68.9 kPa. It then passes to a pipe having an inside diameter of 2.067 inch. The density of the water is 998 kg/m3 . a) Calculate the new pressure p2 in the 2.067inch pipe. Assume no friction losses b) If the piping is vertical and the flow is upward, calculate the new pressure p2. The pressure tap for p2...
A venturimeter is used to measure water flow rate of 7.5m^3/min. If pressure difference between the...
A venturimeter is used to measure water flow rate of 7.5m^3/min. If pressure difference between the wide and throat sections of the venturi is 12.50 kPa, and the pipe diameter at the wide section is 20 cm, calculate the throat diameter. (Use density=1000 kg/m^3 and coefficient of discharge Cd=0.96).
A thin-walled double pipe counter flow heat exchanger is to be used to cool oil (cp...
A thin-walled double pipe counter flow heat exchanger is to be used to cool oil (cp = 2200 j/kg*K) from 150 ℃ to 30 ℃ at a rate of 2.1 kg/s by water (cp= 4180 J/kg*K) that enters at 20 ℃ at a rate of 1.2 kg/s. The diameter of the tube is 2.5 cm, and its length is 10 m. Using Excel (a) Determine the overall heat transfer coefficient of this heat exchanger. (b) Investigate the effects of oil...
Part I. Indicate whether true or false (T or F). ____ Storm water detention ponds typically...
Part I. Indicate whether true or false (T or F). ____ Storm water detention ponds typically are designed to regulate the outflow peak rate at or below a single target value, such as the pre-development (pre-land use change) peak runoff rate for a specified return period event. Detention storage alters the peak but not the volume of the outflow hydrograph. _____ Typical rating curves for weirs are concave upward. Typical rating curves for orifices are concave downward. ____ A sediment...
Which of the following best describes a project management plan? The project charter, WBS, and project...
Which of the following best describes a project management plan? The project charter, WBS, and project scope statement The schedule, management plans, and budget A formal, approved document used to control the project The project manager's plan for managing and controlling the work The engineering department wants the project objective to be a 10 percent improvement in throughput. The information technology department wants no more than 5 percent of its resources to be used on the project. Management, who is...