Question

During a flood flow, the depth of flow in a 10 m wide rectangular channel at...

During a flood flow, the depth of flow in a 10 m wide rectangular channel at 2

sections 200 m apart was found to be 3.0 m and 2.9 m. respectively. The drop in the

water surface elevation was found to be 0.12 m. Estimate the flood discharge

through the channel. Assume n = 0.025.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The flow in a very wide rectangular channel tends to a freefall at which the depth...
The flow in a very wide rectangular channel tends to a freefall at which the depth is reduced to 0.67 times the normal depth. The channel conveys a specific discharge of 4 m3/s/m and has a bed slope of 10 cm/km. Estimate the distance upstream of the fall where the water depth is 0.9 times the normal depth. Take the Manning coefficient as 0.025 and use the step-by-step (direct step) method.
Water approaches a sharp-crested rectangular weir through a channel that is 2 m wide. The depth...
Water approaches a sharp-crested rectangular weir through a channel that is 2 m wide. The depth of flow in the channel is 1 m. The weir crest is 0.6 m above the base of the channel and has a crest width of 0.8 m. It is located in the centre of the channel. Assuming a coefficient of discharge of 0.61, and ignoring side contractions, determine the discharge over the weir: a) Assuming the approach velocity is zero b) Including the...
Find critical depth of a 2 m wide rectangular channel if the flow rate passing through...
Find critical depth of a 2 m wide rectangular channel if the flow rate passing through it is 3 m3/s.
Water flows in a rectangular concrete channel that is 10 m wide and has a slope...
Water flows in a rectangular concrete channel that is 10 m wide and has a slope of 0.005. The depth of the uniform flow in the channel (y1) is 450 mm and the discharge per width of the water is 2.2 m2/s. The downstream channel is smooth, and a hydraulic jump is forced to form in the channel by installing a sill. Calculate: (i) the depth and velocity of the water downstream of the hydraulic jump; (ii) the difference in...
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n...
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n is 0.003. Determine the normal depth when the slope is 0.008. Check whether the flow is sub or supercritical. If the normal depth is to be kept at 2 m, determine the slope.
A bridge is planned on a 6 m wide rectangular channel carrying a flow of 14...
A bridge is planned on a 6 m wide rectangular channel carrying a flow of 14 m3/s at a flow depth of 0.82 m. For reducing the length of the bridge, what is the minimum channel width such that the u/s water level is not influenced for this discharge? Group of answer choices A. None of them correct B. The width can be reduced by one-third C. The width can be reduced by half D. There will be no reduction...
Water flows in a 4-m wide rectangular open channel that has an n = 0.022, a...
Water flows in a 4-m wide rectangular open channel that has an n = 0.022, a slope of 0.005 m/m, and the flow rate is 10 m3/s.   A flow depth of 0.92 m is located at a particular location in the channel. What type of flow profile occurs at that location? Given the roughness value, what is the likely channel material?    (Water surface profile classification problem) Hydraulic Engineering
A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm...
A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm event the flow discharge reaches 15‐m3/s and a depth of 3.6‐m. If the channel bottom is 1‐ft above the reference datum, determine the total energy head for the specified flow conditions.
Determine the depth (y), and the pressure (p) for a rectangular channel that has a discharge,...
Determine the depth (y), and the pressure (p) for a rectangular channel that has a discharge, Q=300 m3/s, (uniform flow) (n= 0.014 Manning) Slope=0.65 b(wide)=2.00 m
1. The channel is a rectangular shape with the wide 0.5 m Specific discharge Q/w=0.01 m2s-1....
1. The channel is a rectangular shape with the wide 0.5 m Specific discharge Q/w=0.01 m2s-1. upstream is 2.0 cm step in the channel bottom flow depth is 6 cm Question: is the flow subcritical or supercritical? Find the elevation of the free surface of the flow and velocity downstream of the step ( within 1 mm). Hint: using an iterative approach. 2. A city had big precipitation which dropped 80 mm of rainfall within 6 hours period. What is...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT