Question

Water is being pumped at 20°C From an open tank through a 0.03561 m smooth pipe...

Water is being pumped at 20°C From an open tank through a 0.03561 m smooth pipe to a second tank at a higher level. The flow rate is 0.8 kg/s through 40 m of straight pipe with two threaded 90 regular elbows, one fully open globe valve and one half open gate valve. The supply tank maintains a liquid level of 2 m, and the water leaves the system at an elevation of 10 m above the floor. Calculate Reynolds number. Consider product viscosity as 0.001 Pa.s and product density as 998.2 kg/m

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Hot water in an open storage tank at 82.2°C is being pumped at a rate of...
Hot water in an open storage tank at 82.2°C is being pumped at a rate of 0.379 m3/min from the tank. The line from the storage tank to the pump suction is 6.1 m of 2-in schedule 40 steel pipe and it contains two elbows. The water discharge line after the pump is 61 m of 2-in pipe and contains two elbows. The water discharges to the atmosphere at a height of 6.1 m above the water level in the...
A farmer wants to pump water from a river to a very big open storage tank...
A farmer wants to pump water from a river to a very big open storage tank nearby using a 55-m long, 16-cm diameter plastic pipe with 5 threaded 90° regular bends, 5 threaded 45° regular bends, and one fully open gate valve. The water velocity near the river surface is 2.7 m/s and the pipe's inlet is placed in the river normal to the direction of water flow to take advantage of this water speed. The elevation difference between the...
Water is pumped through a pipe of diameter 16.0 cm from the Colorado River up to...
Water is pumped through a pipe of diameter 16.0 cm from the Colorado River up to Grand Canyon Village, on the rim of the canyon. The river is at 564 m elevation and the village is at 2101 m. (a) At what minimum pressure must the water be pumped to arrive at the village? (The density of water is 1.00 ✕ 103 kg/m3.) MPa (b) If 4100 m3 are pumped per day, what is the speed of the water in...
The water needs of a small farm are to be met by pumping water from a...
The water needs of a small farm are to be met by pumping water from a well that can supply water continuously at a rate of 5 L/s. The water level in the well is 20 m below the ground level, and water is to be pumped to a large tank on a hill, which is 58 m above the ground level of the well, using 6-cm internal diameter plastic pipes. The required length of piping is measured to be...
Methane gas is being pumped through a 305-m length of 52.5-mm-ID steel pipe at the rate...
Methane gas is being pumped through a 305-m length of 52.5-mm-ID steel pipe at the rate of 41.0 kg/(m2 · s). The inlet pressure is p1 = 345 kPa abs. Assume isothermal flow at 288.8 K. p2 = 298.4 kPa. What is the velocity (V2) at the end of the pipe? The viscosity is 1.04 × 10?5 Pa · s. (Answer V2= 20.62 m/s, show all work)
Water flows through a pipe that gradually descends from a height of 6.78 m to the...
Water flows through a pipe that gradually descends from a height of 6.78 m to the ground. Near the top, the cross-sectional area is 0.4 m2, and the pipe gradually widens so that its area near the ground is 0.8 m2. Water leaves the pipe at a speed of 16.8 m/s. What is the difference in the water pressure between the top and bottom of the pipe?
Water flows through a pipe that gradually descends from a height of 6.78 m to the...
Water flows through a pipe that gradually descends from a height of 6.78 m to the ground. Near the top, the cross-sectional area is 0.4 m2, and the pipe gradually widens so that its area near the ground is 0.8 m2. Water leaves the pipe at a speed of 16.8 m/s. What is the difference in the water pressure between the top and bottom of the pipe? In Pa
Water is pumped by a motor-pump unit from a lake to a storage tank 17 m...
Water is pumped by a motor-pump unit from a lake to a storage tank 17 m above at a rate of 120 L/s. The storage tank is open to the atmosphere. The motor consumes 25 kW of electric power and the motor effciency is 95%. Disregarding any changes in kinetic energy of the water, determine (a) the overall effciency of the pump-motor unit, (b) the effciency of the pump and (c) the shaft power supplied by the motor to the...
A bathtub spigot in a top floor apartment lies 20 m above street level, where water...
A bathtub spigot in a top floor apartment lies 20 m above street level, where water is pumped into the apartment building. The pipe that leads into the building has an inner radius of 0.57 cm , which tapers to 0.40 cm at the bathtub spigot opening. The speed of the water leaving the spigot is 12 m/s . (The density of water is 1000 kg/m 3 .) Assume the water flows without viscosity. (a) What is the speed of...