Question

3. Calculate the load carrying capacity and percentage of reinforcement for a short rectangular column of...

3. Calculate the load carrying capacity and percentage of reinforcement for a short rectangular column of
cross section dimension 280 mm x 500 mm is reinforced with 4 bars of 25 mm diameter, 2 bars of 20
mm diameter and 2 bars of 12 mm diameter. Use M30 grade concrete and Fe 500 grade steel. Also
design a 4 legged ties necessary for this section.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
1. (a) Explain the difference between columns which are short and slender and those which are...
1. (a) Explain the difference between columns which are short and slender and those which are braced and unbraced. (b) Calculate the ultimate axial load capacity of a short-braced column supporting an approximately symmetrical arrangement of beams assuming that it is 500 mm square and is reinforced with eight 20 mm diameter bars. Assume that fcu = 40 N/mm2, fy = 500 N/mm2 and the concrete cover is 25 mm. Design the shear reinforcement for the column. 2. (a) A...
A short reinforced concrete column is subjected to a 700 kips axial compressive load. The modulus...
A short reinforced concrete column is subjected to a 700 kips axial compressive load. The modulus of elasticity of plain concrete and steel are 4,500,000 psi and 29,000,000, respectively, and the cross-sectional area of steel is 3.0% of that of the reinforced concrete. Considering the column as a structural member made of a composite material and subjected to load parallel to the steel bars. Calculate the modulus of elasticity of the reinforced concrete, as well as how much load is...
A reinforced concrete column, 5.0 m high has a cross section of 400 mm x 400...
A reinforced concrete column, 5.0 m high has a cross section of 400 mm x 400 mm. it is reinforced by four steel bars each 20 mm in diameter and carries a load of 1000 kN. Young’s modulus for steel is 200,000 N/mm2 and for concrete is 15,000 N/mm2. Determine the deformation in mm? please show solution
(30 pts) A short reinforced concrete column is subjected to a 1000 kN axial compressive load....
(30 pts) A short reinforced concrete column is subjected to a 1000 kN axial compressive load. The moduli of elasticity of plain concrete and steel are 25 GPa and 207 GPa, respectively, and the cross-sectional area of steel is 2% of that of the reinforced concrete. Considering the column as a structural member made of a composite material and subjected to load parallel to the steel rebars, calculate the following: a. the modulus of elasticity of the reinforced concrete b....
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of...
A reinforced concrete beam is constructed with Grade 30 concrete which has a cross section of 450 mm x 660 mm (b = 450 mm and D = 660 mm). The length of the beam is 5 m. The elastic modulus of the concrete is 32.8 GPa. A uniformly distributed live load of 23 kN/m is acting on the beam. Determine (a) the design bending moment on this beam for strength limit state, (b) modular ratio assuming Es = 200...
a rectangular beam having dimensions: b=300mm and d=550mm, spans 6m face to face of simple supports....
a rectangular beam having dimensions: b=300mm and d=550mm, spans 6m face to face of simple supports. it is reinforced for flexure with 3D36mm bars that continue uninterrupted to the ends of the soan. it is to carry a service dead load of 23.8 KN/m (including self-weight) and a service lice load equal to 47.6 KN/m, both uniformly distributed along the span. use fc’=27.6 Mpa and fy=414.7 Mpa. Normal weight concrete will be used and diameter of stirrup are 10mm. 1.using...
During construction, field tests were conducted to assess the suitability of the column to withstand a...
During construction, field tests were conducted to assess the suitability of the column to withstand a safe buckling load of 2.5 kN assuming a factor of safety 4 using two different hollow columns made up of steel and concrete. Both columns have same cross section but varying length and different support conditions. Steel column of length 3 m having external diameter 40 mm was tested with one end fixed and the other end hinged, when subjected to a compressive stress...
1: During construction, field tests were conducted to assess the suitability of the column to withstand...
1: During construction, field tests were conducted to assess the suitability of the column to withstand a safe buckling load of 2.5 kN assuming a factor of safety 4 using two different hollow columns made up of steel and concrete. Both columns have same cross section but varying length and different support conditions. Steel column of length 3 m having external diameter 40 mm was tested with one end fixed and the other end hinged, when subjected to a compressive...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT