Question

A centrifugal pump operating at 1800 rpm with an efficiency of 70% discharges 30 L/s against...

  1. A centrifugal pump operating at 1800 rpm with an efficiency of 70% discharges 30 L/s against a 25-m head and requires 10.5 KW, Assuming that the efficiency remains constant, estimate the discharge, head and power if the speed is reduced to 1500 rpm.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A centrifugal pump has an impeller of outer diameter, 20 cm and outer width,4 cm. The...
A centrifugal pump has an impeller of outer diameter, 20 cm and outer width,4 cm. The pump delivers a flow of 30 L/s against a head of 10.5 m at an operating speed of 550 rpm. If the hydraulic efficiency of the pump is 85% and the overall efficiency is 80%, determine the impeller outlet vane angle and the power required to run the pump.
‏A centrifugal pump delivers water against a net head of 14 m and a speed of...
‏A centrifugal pump delivers water against a net head of 14 m and a speed of 1300 rpm. The blade angle is given as 35º. The impeller outlet diameter is 225 mm and outlet width is 50 mm. Determine the discharge of the pump if manometric efficiency is 83%.
1.       A centrifugal pump running at 2950 rpm under test at peak efficiency gave the following...
1.       A centrifugal pump running at 2950 rpm under test at peak efficiency gave the following results: Effective head H= 75m of water, rate of flow Q= 0.05 m3/s, overall efficiency h= 76%. A dynamically similar pump is to operate at a corresponding point of its characteristic when delivering 0.5 m3/s through a pipe 800m long and 1m diameter for which the friction coefficient f =0.05. The pipe discharges 90m above reservoir level. Determine the rotational speed at which the...
The rotation speed of a centrifugal water pump is 1500 rpm, its flow rate is 15...
The rotation speed of a centrifugal water pump is 1500 rpm, its flow rate is 15 L / s, the rotor diameter is 0.2 m at the outlet, the rotor width at the outlet is 0.01 m and the mechanical efficiency is 0.92. For the fluid entering the rotor in the axial direction, the wing angle is given as 30o at the outlet. What power should be given to the shaft of this pump? (ρwater = 1000 kg / m3)
Please answer the following Case analysis questions 1-How is New Balance performing compared to its primary...
Please answer the following Case analysis questions 1-How is New Balance performing compared to its primary rivals? How will the acquisition of Reebok by Adidas impact the structure of the athletic shoe industry? Is this likely to be favorable or unfavorable for New Balance? 2- What issues does New Balance management need to address? 3-What recommendations would you make to New Balance Management? What does New Balance need to do to continue to be successful? Should management continue to invest...