Question

A steel rod without constrain has a length of 200 mm and diameter of 20 mm...

A steel rod without constrain has a length of 200 mm and diameter of 20 mm at a temperature of 25oC. If the rod is heated uniformly to 125oC, what will be the length and diameter (accurate to 1/100 mm). What will be the stress at 125oC? The linear coefficient of thermal expansion of steel is 12.5x10-6 m/m/C.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A steel rod is 2.795 cm in diameter at 17.00°C. A brass ring has an interior...
A steel rod is 2.795 cm in diameter at 17.00°C. A brass ring has an interior diameter of 2.788 cm at 17.00°C. At what common temperature will the ring just slide onto the rod? The linear expansion coefficient of steel is 11.00 × 10-6 1/C°. The linear expansion coefficient of brass is 19.00 × 10-6 1/C°.
a solid circular steel rod has a length of 70 mm, diameter of 20 mm, and...
a solid circular steel rod has a length of 70 mm, diameter of 20 mm, and an eccentricity(offset) of 6 mm.Syiely =300Mpa. find the critical buckling load if its boundary condition are fixed-free(use theoretical value in table)
A steel rod is 2.689 cm in diameter at 35.00°C. A brass ring has an interior...
A steel rod is 2.689 cm in diameter at 35.00°C. A brass ring has an interior diameter of 2.684 cm at 35.00°C. At what common temperature will the ring just slide onto the rod? The linear expansion coefficient of steel is 11.00 × 10-6 1/C°. The linear expansion coefficient of brass is 19.00 × 10-6 1/C°. 4sig figs
Stainless steel has a specific heat capacity of 500 J/(kg.K) and a linear thermal expansion coefficient...
Stainless steel has a specific heat capacity of 500 J/(kg.K) and a linear thermal expansion coefficient of 1.7 x 10-5 /K. Consider a stainless steel rod which has a length of 1.00 m and a diameter of 5.00 mm. When the rod is heated from room temperature to a new temperature T, its length increases to 1.01 m. How much heat was needed to heat the rod? The density of stainless steel is 8.0 g/cm3. Question 16 options: 130 kJ...
A solid steel bar 100 mm diameter is firmly encased by an 8 mm brass liner...
A solid steel bar 100 mm diameter is firmly encased by an 8 mm brass liner over its entire 750 mm length. The component is securely fixed at both ends and the temperature of the system is evenly increased by 100ºC. Calculate EACH of the following: The difference between the induced stresses; The final length of the bar if it is free to expand. Note:   Modulus of elasticity for steel = 206 GN/m2             Modulus of elasticity for brass =...
Strength of Material A steel rod is 2m long with a diameter of 30mm has a...
Strength of Material A steel rod is 2m long with a diameter of 30mm has a standard temperature of 18℃. It is exposed in a room with a temperature of 40 ℃. Use ? = 11.6 ? 10−6/℃ and E = 200 GPa. Find a.) the thermal deformation, b.) thermal stress and c.) instead of heating the rod, what equivalent axial deformation is necessary to have a deformation that is the same as the deformation due to the change in...
A cylindrical rod have 400 cm length, 4 cm diameter and weigh 8000 gm at 25...
A cylindrical rod have 400 cm length, 4 cm diameter and weigh 8000 gm at 25 oC. -6o -1 The Linear coefficient of thermal expansion (αl) = 15.3 x10 C . The rod is heated to 400 oC. a. Calculate the volume of the rod at 25 oC & 400 oC. Show all steps of calculations. b. Calculate the density of the rod at 25 oC & 400 oC. Show all steps of calculations. A cylindrical rod have 400 cm...
A steel rod 30.0 m long, installed when the temperature was 10°C, is in a bridge...
A steel rod 30.0 m long, installed when the temperature was 10°C, is in a bridge that heats up to 40oC on a hot summer day. Steel's coefficient of linear expansion is 1.2 × 10-5 K-1. The bridge is built so the rod has an expansion space of 5 cm. Is this enough space? What is the increase in the length of the rod, in mm?
a.) An aluminum rod has an initial length of Lo = 670 [mm] and has an...
a.) An aluminum rod has an initial length of Lo = 670 [mm] and has an initial temperature of 24.5o. At what value should the temperature be raised such that the rod would expand at a length of 672.01[mm]? The coefficient of thermal expansion of aluminum is 23.80x10^-6 Co. b.) Three rods made of copper, aluminum, and brass has the same initial length Lo. All rods expand to the same final length L when subjected to change temperature. Which of...
A steel rod is 3.000 cm in diameter at 33.0 °C. A brass ring has an...
A steel rod is 3.000 cm in diameter at 33.0 °C. A brass ring has an interior diameter of 2.992 cm at 33.0 °C. At what common temperature will the ring just slide onto the rod? The coefficients of linear expansion of steel and brass are 1.100×10-5 , 1.900×10-5 /°C, respectively, answer in °C.