Question

A simply supported beam is 3 m long. It carries a uniformly distributed load of 6...

A simply supported beam is 3 m long. It carries a uniformly distributed load of 6 kN/m throughout its span and a concentrated load of 15 kN at a point 2 m from the left support. Assuming that the beam has a rectangular shape whose width and depth are 150 mm and 250 mm, respectively. Determine the maximum flexural stress in MPa developed in the beam.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

Maximum flexural stress developed in the beam is 10.24 MPa.

Complete solution is given below.

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
A simply supported beam spans 30 ft. and carries a uniformly distributed dead load of 3.5...
A simply supported beam spans 30 ft. and carries a uniformly distributed dead load of 3.5 kip/ft,excluding the beam self-weight. Also, in addition, a concentrated dead load of 15 kips and a concentrated live load of 25kips, both act at the center of a 30 ft span.Select the lightest-weight W-Shape to carry the load(A992 steel). Use LRFD method.
. A simply supported beam has a width of 200mm and depth of 400mm is 4m...
. A simply supported beam has a width of 200mm and depth of 400mm is 4m long. It carries a uniformly distributed load of 20 kN/m over the whole beam and a point load of 40 kN at the center of the beam. Compute the maximum deflection if the maximum slope produced in the beam is 2× ??-3 radian.
2. A simply supported beam has a width of 200mm and depth of 400mm is 4m...
2. A simply supported beam has a width of 200mm and depth of 400mm is 4m long. It carries a uniformly distributed load of 20 kN/m over the whole beam and a point load of 40 kN at the center of the beam. Compute the maximum deflection if the maximum slope produced in the beam is 2× ??-3 radian.
A simply supported beam, 3m long, 50mm wide by 100mm deep, carries a uniformly distributed of...
A simply supported beam, 3m long, 50mm wide by 100mm deep, carries a uniformly distributed of 1200 N/m over its entire length. Determine the following: 1. Value of R1 2. Value of R2 3. Value of Max. V 4. Value of Max. M 5. Value of I 6. Maximum value of shearing stress τ 7. Maximum value of flexural σ
A rectangular RC beam is simply supported over a span of 8m and carries a dead...
A rectangular RC beam is simply supported over a span of 8m and carries a dead load of 15kN/m (including self-weight) and an imposed load of 8kN/m. The beam is 250mm wide and has an effective depth of 400mm. Grade 30 concrete is to be used. Determine if the beam should be singly reinforced or doubly reinforced.
2. A simply supported beam has a width of 200mm and depth of 400mm is 4m...
2. A simply supported beam has a width of 200mm and depth of 400mm is 4m long. It carries a uniformly distributed load of 20 kN/m over the whole beam and a point load of 40 kN at the center of the beam. Compute the maximum deflection if the maximum slope produced in the beam is 2× ??-3 radian. (6 M Blease i want prompt clear solution for this question in detail,.
A simply supported beam spans 20 ft. and carries a uniformly distributed load of 1 kip/ft,including...
A simply supported beam spans 20 ft. and carries a uniformly distributed load of 1 kip/ft,including the beam self-weight, and a live load of 2.5kip/ft. Determine the minimum required plastic section modulus and select the lightest-weight W-Shape to carry the moment (A992 Steel). Use LRFD method.
A simply supported beam of 6m length carries a dead load of 10 kn/m and live...
A simply supported beam of 6m length carries a dead load of 10 kn/m and live load of 8 kn/m. It also support a point dead load of 60Kn at the centre. Using the formula calculate the moment modification factor.
A 5.3m long simply supported beam is subjected to a dead load of 23 and live...
A 5.3m long simply supported beam is subjected to a dead load of 23 and live load of 28 kN/m. If the beam has width, height and concrete cover of 25cm, 50cm and 3cm respectively, design this beam. Use C25 and S220. (if required; k1=0.85 and d’’=2cm)
A simply supported rectangular beam of 5m span carries a characteristic dead, gk (inclusive of the...
A simply supported rectangular beam of 5m span carries a characteristic dead, gk (inclusive of the beam’s self-weight) and imposed, qk, loads of 15 and 7 kN/m respectively. Given the following data: Beam: 285mm wide and 500mm high, Reinforcement steel: High tensile steel, Concrete grade: C30, Exposure condition: Mild and Fire resistance = 1.5h. Design the rectangular beam according to BS8110.
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT