Question

A rectangular channel has b = 3 m and d = 1 m. If n and...

A rectangular channel has b = 3 m and d = 1 m. If n and S are the same, what is the diameter of a semicircular channel that will have the same discharge? How is the perimeter of the semicircular channel compared to the rectangular, is it lesser or higher (by how many percent)?

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The discharge in a channel with bottom width 3 m is 12 m3 s–1. If Manning’s...
The discharge in a channel with bottom width 3 m is 12 m3 s–1. If Manning’s n is 0.013 m-1/3 s and the streamwise slope is 1 in 200, find the normal depth if: (a) the channel has vertical sides (i.e. rectangular channel); (b) the channel is trapezoidal with side slopes 2H:1V. (Answer with steps plz)
A wide rectangular channel of width 20 m and has n = 0.035, determine the critical...
A wide rectangular channel of width 20 m and has n = 0.035, determine the critical bed slope and discharge for critical depths of 0.2, 0.5 and 1.0 m
A rectangular channel with a width of 6.5m and water depth of 1.35m has a channel...
A rectangular channel with a width of 6.5m and water depth of 1.35m has a channel bed slope of 1 in 900. Determine the discharge when Manning’s roughness coefficient n=0.015. By changing the size of the channel but keeping the same quantity of lining, determine the new dimensions (water depth and width) if it is desired to increase the discharge to a maximum and also calculate percentage increase in discharge
Determine the depth (y), and the pressure (p) for a rectangular channel that has a discharge,...
Determine the depth (y), and the pressure (p) for a rectangular channel that has a discharge, Q=300 m3/s, (uniform flow) (n= 0.014 Manning) Slope=0.65 b(wide)=2.00 m
A rectangular channel 6.20 m wide and 1.20 m deep is laid on a uniform slope...
A rectangular channel 6.20 m wide and 1.20 m deep is laid on a uniform slope of 0.003. The roughness coefficient of the channel is 0.013 m. a. Determine the discharge in the channel in m3/sec. b. Determine the savings in the lining per meter length of channel if the most efficient rectangular section is to be used for the same flow and properties. c. Determine the savings in earth excavation per meter length of channel if the most efficient...
A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm...
A 3‐m wide prismatic rectangular channel (S=0.005m/m) collects stormwater runoff in Jackson, MS. During a storm event the flow discharge reaches 15‐m3/s and a depth of 3.6‐m. If the channel bottom is 1‐ft above the reference datum, determine the total energy head for the specified flow conditions.
Water flows in a 4-m wide rectangular open channel that has an n = 0.022, a...
Water flows in a 4-m wide rectangular open channel that has an n = 0.022, a slope of 0.005 m/m, and the flow rate is 10 m3/s.   A flow depth of 0.92 m is located at a particular location in the channel. What type of flow profile occurs at that location? Given the roughness value, what is the likely channel material?    (Water surface profile classification problem) Hydraulic Engineering
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n...
The discharge through a rectangular channel 4.4 m wide is 16 m3/s. The Manning’s coefficient n is 0.003. Determine the normal depth when the slope is 0.008. Check whether the flow is sub or supercritical. If the normal depth is to be kept at 2 m, determine the slope.
A rectangular channel of bottom width B = 7 m carries an average discharge of Q...
A rectangular channel of bottom width B = 7 m carries an average discharge of Q = 8 m3/s. There are two successive long reaches. The first reach has s01=0.015 and n1=0.010; and the second reach has s02=0.0077 and n2=0.021. Classify the slopes.
A bridge is planned on a 6 m wide rectangular channel carrying a flow of 14...
A bridge is planned on a 6 m wide rectangular channel carrying a flow of 14 m3/s at a flow depth of 0.82 m. For reducing the length of the bridge, what is the minimum channel width such that the u/s water level is not influenced for this discharge? Group of answer choices A. None of them correct B. The width can be reduced by one-third C. The width can be reduced by half D. There will be no reduction...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT