Question

Two reservoirs are connected by two pipelines in parallel. Their diameters are 200mm and 400mm and...

Two reservoirs are connected by two pipelines in parallel. Their diameters are 200mm and 400mm
and their respective lengths are 1300m and 2700m. If f = 0.007 for the smaller pipe, and f = 0.005 for
the larger pipe, calculate the discharge from the larger pipe when the discharge from the smaller
pipe is 0.056m3/s

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Two large water reservoirs, of which the water levels differ by 2m,arre 800m apart. Neglect the...
Two large water reservoirs, of which the water levels differ by 2m,arre 800m apart. Neglect the minor losses and calculate the quantity flowing between the reservoirs in litres per second if they are connected by a single pipe of diameter 200mm for the first 300m and branching for the remaining 500m into two parallel pipes of diameter 100mm and 150mm respectively (f = 0.009).
A 400 mm diameter pipe, conveying water, branches into two pipes of diameters 300 mm and...
A 400 mm diameter pipe, conveying water, branches into two pipes of diameters 300 mm and 200mm respectively. If the discharge in the 400 mm diameter pipe is 380L/s, compute the average velocity in this pipe. If the average velocity in 300mm diameter pipe is 200L/s, find the discharge and velocity head in 200mm diameter pipe.                                               
In an industrial facility located in Doha, Qatar, two parallel hot and cold pipelines spaced 0.7...
In an industrial facility located in Doha, Qatar, two parallel hot and cold pipelines spaced 0.7 m apart are buried in soil. The pipes have outer-diameters of 150 and 100 mm with surface temperatures of 170°C and 5°C, respectively. It was found through measurements that the heat transfer rate between the two pipelines is 135 Watt per meter length. It is believed that there is large discrepancy between predicted and measured heat transfer rate. What are the possible technical reasons...
A pipe system connects two reservoirs whose difference in elevation is 150 ft. The pipe system...
A pipe system connects two reservoirs whose difference in elevation is 150 ft. The pipe system consists of 1000 ft of 24 inch concrete pipe, branching into 1000 ft of 12 inch concrete pipe and 1200 ft of 18 ich concrete pipe in parallel, which join again to a single 24 inch line 2000 ft long. What would be the flow discharge in each pipe? assume f=0.02 for all pipes and assume that the minor losses can be neglected.
Two resistors have resistances R(smaller) and R(larger), where R(smaller) < R(larger). When the resistors are connected...
Two resistors have resistances R(smaller) and R(larger), where R(smaller) < R(larger). When the resistors are connected in series to a 12.0-V battery, the current from the battery is 1.05 A. When the resistors are connected in parallel to the battery, the total current from the battery is 10.7 A. Determine the two resistances.
Two resistors have resistances R(smaller) and R(larger), where R(smaller) < R(larger). When the resistors are connected...
Two resistors have resistances R(smaller) and R(larger), where R(smaller) < R(larger). When the resistors are connected in series to a 12.0-V battery, the current from the battery is 1.52 A. When the resistors are connected in parallel to the battery, the total current from the battery is 10.5 A. Determine the two resistances.
Two resistors have resistances R(smaller) and R(larger), where R(smaller) < R(larger). When the resistors are connected...
Two resistors have resistances R(smaller) and R(larger), where R(smaller) < R(larger). When the resistors are connected in series to a 12.0-V battery, the current from the battery is 1.48 A. When the resistors are connected in parallel to the battery, the total current from the battery is 11.5 A. Determine the two resistances.
When a pipeline branches into two parallel pipes, we have seen how the flow can divide...
When a pipeline branches into two parallel pipes, we have seen how the flow can divide unevenly, depending upon the lengths and diameters of the two branches. Consider a parallel pipe system made up of two branches. For simplicity, assume that the friction factors are the same in the two branches. Pipe A has a diameter of 1.5 inches. Pipe B has a diameter of 1 inch and a length of 10 feet. So, if the pipes were the same...
Two capacitors give an equivalent capacitance of 9.00 pF when connected in parallel and an equivalent...
Two capacitors give an equivalent capacitance of 9.00 pF when connected in parallel and an equivalent capacitance of 1.59 pF when connected in series. What is the capacitance of each capacitor? smaller capacitor     pF bigger capacitor     pF
There two unknown capacitors C 1 and C 2. When they are connected in parallel, the...
There two unknown capacitors C 1 and C 2. When they are connected in parallel, the total capacitance is 4,690μ F; when they are connected in series, the total capacitance is 715μ F. What is the largest capacitance (in unit of μ F) of C 1 and C 2?
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT