Question

Wastewater treatment The Ampang Jaya Municipal Council with a population of 350,000 and several industries discharged...

Wastewater treatment

  1. The Ampang Jaya Municipal Council with a population of 350,000 and several industries discharged 11 MGD of raw sewage into an activated sludge system treatment plant. The average concentration of BOD5 is 240 mg/L and the suspended solids is 260 mg/L.

  1. If the average domestic per capita sewage flow is 225 L/c.day, what is the average flow of the industrial wastewater (in MGD)?
  1. marks)

  1. If the average BOD5 load from the domestic sewage is 55gcapita-1day-1, determine the average daily BOD5 loading (kg/day) from the industrial wastewater. What is the population equivalent to this BOD5 loading?
  1. marks)

c)   Biological treatment is an important and integral part of any wastewater treatment plant that treats wastewater from either municipality or industry having soluble organic impurities. The MPAJ wastewater is going to be treated in a complete-mix activated sludge plant.

(i) List 3 important parameters of wastewater constituents that can be removed   by a the activated sludge system.

                                                                                                                

(ii) Draw a schematic diagram showing all the typical treatment processes and waste flow paths in the entire municipal wastewater treatment plant. Also show and label the residuals produced by certain processes.

Homework Answers

Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5...
The volumetric flow to the ACME wastewater treatment plant is 25 MGD. The influent soluble BOD5 is 200 mg/L and the effluent soluble BOD5 is 8 mg/L. The plant is designed to operate with a mean cell (biomass) residence time of 10 days. The yield coefficient is 0.6 mg biomass/mg substrate, and the biomass decay rate is 0.09/day. The reactor is to operate at a biomass concentration of 2500 mg/L. The thickened underflow biomass concentration from the secondary clarifier is...
Draw a neat treatment flow chart for a municipal wastewater treatment. Treated wastewater will be discharged...
Draw a neat treatment flow chart for a municipal wastewater treatment. Treated wastewater will be discharged into Red River (Fargo, ND). Please label all units and show flow directions. Also indicate (in the flow chart) where sludge will be generated and chemicals will be added. You can use either a trickling filter or activated sludge process as your biological treatment process. Draw a neat treatment flow chart for a drinking water treatment. Source of water is groundwater (West Fargo, ND)....
As an environmental engineer, you have been selected to design a secondary wastewater treatment plant for...
As an environmental engineer, you have been selected to design a secondary wastewater treatment plant for your town of 15000 people which also has some industry that discharges wastewater to the plant. The average daily wastewater flow is 2.1 MGD. If the If the average domestic per capita sewage flow is 100 gpcd, what is the average flow of the industrial wastewater (in MGD)? *
A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process...
A wastewater treatment plant that treats wastewater to secondary treatment standards uses a primary sedimentation process followed by an activated sludge process composed of aeration tanks and a secondary clarifiers. This problem focuses on the activated sludge process. The activated sludge process receives a flow of 15 million gallons per day (MGD). The primary sedimentation process effluent has a BOD5 concentration of 180 mgBOD5/L (this concentration is often referred as S). Before flowing into the activated sludge process, the primary...
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a...
Problem #3: Biochemical Oxygen Demand (BOD) and Stream Quality A wastewater treatment plant designed for a community of 45,000 people has a flow of 100 gal/person/day and a BOD5 loading of 0.2 lb/person/day. The upstream characteristics of the receiving waters are: stream flow rate = 20 cfs and BOD5 = 2 mg/L The water quality standards require the in-stream BOD5 to be less than 7 mg/L in this stretch of the river. The minimum BOD removal efficiency that the treatment...
A 14 mgd wastewater treatment plant has a primary clarifier that treats an influent with 800...
A 14 mgd wastewater treatment plant has a primary clarifier that treats an influent with 800 mg/L of solids and a removal efficiency of 55%. Sludge at the bottom of the tank is pumped at a rate of 0.1 mgd. a. What is the effluent solids concentration from the clarifier (in mg/L)? b. What is the solids concentration in the sludge at the bottom of the tank (in mg/Land %)? c. The primary sludge is further processed in a digester...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process...
You have been retained to design a wastewater treatment plant using a conventional activated sludge process for a town of 40,000 people. The industrial flow contribution to the sewer system is 300,000 gallons per day. Effluent discharge standards require effluent BOD5 and total suspended solids concentration of <10 mg/l. Assume the following design criteria are applicable: Domestic sewage flow = 100 gal/cap/day (including I/I) BOD loading = 0.18 lbs/cap/day TSS loading = 0.20 lbs/cap/day BOD removal in primary = 33%...
Dechlorination contact tank (Wastewater Treatment) An activated sludge plant has a design flow (average daily flow)...
Dechlorination contact tank (Wastewater Treatment) An activated sludge plant has a design flow (average daily flow) of 11 MGD. Determine dimensions of dechlorination tank. The design parameters: use 1 tank. detention time = 30 sec, depth = 10 ft, rectangular tank: L = 4 W. use maximum hourly flow (3 * Average design flow)
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater...
A completely mixed activated sludge process is designed to treat 20,000 m3 /d of domestic wastewater having a BOD5 concentration of 250 mg/L following primary treatment. The NPDES permit requirement for effluent BOD5 and TSS is 20 mg/L for each. The biokinetic parameters have been established as: yield = 0.6 , k = 5/d, Ks = 60 mg/L, and kd = 0.06/d. The MLVSS concentration in the aeration tank is to be maintained at 3000 mg/L and the ratio of...
Effluent from a wastewater-treatment plant is discharged to a surface stream. The characteristics of the effluent...
Effluent from a wastewater-treatment plant is discharged to a surface stream. The characteristics of the effluent and the stream are given in the table below. Determine the stream characteristics after mixing has occurred. Parameter Effluent Stream Flow, 8500 m3/day 1.5 m3/sec BOD5, mg/L 25.0 2.0 Ammonia, mg/L 10.0 0.0 Nitrate, mg/L 7.0 3.0 Chloride, mg/l 15 5.0
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT