Question

Case Study 1 - What is the flow rate? An engineering Channel with top width is...

Case Study 1 - What is the flow rate? An engineering Channel with top width is 20 ft, bottom width is 10 ft, and depth is 5 ft. Channel slope is 1%, and manning N is 0.05. A trapezoid Channel.

Engineering   Civil-Engineering   
0 0
Add a commentTranscribed image text
Next >

Homework Answers

Answer #1

0 0
Know the answer?
Your Answer:

Post as a guest

Your Name:

What's your source?

Earn Coins

Coins can be redeemed for fabulous gifts.

Log In

Sign Up

Not the answer you're looking for?
Ask your own homework help question
Similar Questions
Water is flowing uniformly in a finished-concrete channel of trapezoidal cross section with a bottom width...
Water is flowing uniformly in a finished-concrete channel of trapezoidal cross section with a bottom width of 0.7 m, trapezoid angle of 50°, and a bottom angle of 0.45°. If the flow depth is measured to be 0.45 m, determine the flow rate of water through the channel. Manning coefficient (n) for finished concrete is 0.012.
A rectangular channel has a width of 9.8 m and a flow discharge of 48 m3/dt....
A rectangular channel has a width of 9.8 m and a flow discharge of 48 m3/dt. Slope of the channel bottom is 0.0018 and manning coefficient is 0.037. Calculate normal water depth and critical water depth
3. A trapezoidal channel has a base width b = 8 ft and side slopes 6H:1V....
3. A trapezoidal channel has a base width b = 8 ft and side slopes 6H:1V. The frictional slope is Sf = 0.035 and the Manning roughness coefficient is n = 0.014. Design a channel if channel discharge is = 15.45 m3 /s using Mannings equation. The farmer land is 3.482 acre with a length of 951.43 ft. what is the best length for the grass waterway? Depth of channel, d=? (5).   Top width of the channel=? (3) Freeboard of...
Calculate the depth of flow in a trapezoidal channel with a bottom width of 3m and...
Calculate the depth of flow in a trapezoidal channel with a bottom width of 3m and whose walls slope 40 degrees with the horizontal. The channel is made of unfinished concrete and is laid on a 0.1% slope. The discharge is 15m^3/s.
A trapezoidal concrete channel (n = 0.015) has side slopes of 2H:1V, a bottom width of...
A trapezoidal concrete channel (n = 0.015) has side slopes of 2H:1V, a bottom width of 10.0 ft, and a longitudinal slope of 0.005. (a) Compute the discharge rate (in cfs) and velocity (ft/s) when the water depth is 3.0 ft. (b) Compute normal depth and critical depth (in feet) for a discharge rate of 300 cfs.
Consider the California aqueduct, which is a concrete trapezoidal channel with a bottom width of 40...
Consider the California aqueduct, which is a concrete trapezoidal channel with a bottom width of 40 ft, a longitudinal slope of 0.004% and 1.5H:1V sideslopes (z = 1.5). Assume n = 0.013. The design discharge is 6400 mgd. (use 9900 cfs) The depth of water is 29 ft at point A. The depth of water is 30 ft at point B. (a) What is the normal depth? b) Determine the critical depth. (c) What type of profile exists in the...
Q4. A hydraulic jump occurs fort the given flow conditions: discharge=20 m3/s, upstream channel geometry trapezoid...
Q4. A hydraulic jump occurs fort the given flow conditions: discharge=20 m3/s, upstream channel geometry trapezoid (upstream flow depth=100 cm, bottom width=100 cm, m=2), downstream channel geometry rectangular (width= 500 cm). Calculate downstream flow depth and power loss in the hydraulic jump.
A trapezoidal channel has a bottom width of 5 m and side slopes m = 2....
A trapezoidal channel has a bottom width of 5 m and side slopes m = 2. If the flow rate is 20 m3/s, what is critical depth?
A rectangular laboratory channel has a bottom width of 6.0 in, a Manning roughness coefficient of...
A rectangular laboratory channel has a bottom width of 6.0 in, a Manning roughness coefficient of n = 0.010, longitudinal slope of 2% (So = 0.02). The discharge is 180 gpm. Assume α = 1. The water depth is 2.5 inches at Point A, and 3.0 inches at Point B. (a) Determine normal depth (report your answer in inches) (b) Determine critical depth (report your answer in inches) (c) Determine category of channel slope (mild or steep). State the basis...
Water flows in a rectangular channel in which the bottom width is b = 0.9 (m)....
Water flows in a rectangular channel in which the bottom width is b = 0.9 (m). The channel lining has an estimated Manning’s of n = 0.017, and the longitudinal slope of the channel is S% = 0.50. If the flowrate is Q = 1696 (L/s) and the depth of flow at a gaging station is Y = 0.22 (m), Calculate the critical depth yc Calculate the normal depth yn Classify the water surface profile. State whether the depth increases...
ADVERTISEMENT
Need Online Homework Help?

Get Answers For Free
Most questions answered within 1 hours.

Ask a Question
ADVERTISEMENT